PI74FCT2245T

Storage Temperature .................................................................... –65°C to +150°C
Ambient Temperature with Power Applied ....................................–40°C to +85°C
Supply Voltage to Ground Potential (Inputs & VCC Only) ............. –0.5V to +7.0V
Supply Voltage to Ground Potential (Outputs & D/O Only) ........... –0.5V to +7.0V
DC Input Voltage ............................................................................ –0.5V to +7.0V
DC Output Current ...................................................................................... 120mA
Power Dissipation ..........................................................................................0.5W

Note:
Stresses greater than those listed under MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability.

Pericom Semiconductor's PI74FCT series of logic circuits are produced using the Company's advanced 0.6/0.8 micron CMOS technology, achieving industry leading speed grades. All PI74FCT2XXX devices have a built-in 25 Ohm series resistor on all outputs to reduce noise because of reflections, thus eliminating the need for an external terminating resistor.

The PI74FCT245T/640T/645T and PI74FCT2245T/2640T/2645T are 8-bit wide octal buffer bidirectional transceivers designed for asynchronous two-way communication between data buses. The transmit/receive (T/R) input determines the direction of data flow through the bidirectional transceiver. Transmit (active HIGH) enables data from A ports to B ports, and receive (active LOW) from B ports to A ports. The output of PI74FCT245T/640T/645T and PI74FCT2245T/2640T/2645T enable (OE) input, when HIGH, disables both A and B ports by placing them in HIGH Z condition.