PI6C2409-1HL

The PI6C2409-1HL is designed as a PLL based, zero-delay buffer, with the ability to distribute nine outputs of up to 133MHz at 3.3V. All the outputs are distributed from a single clock input CLKIN and output OUT0 performs zero delay by connecting a feedback to PLL.

PI6C2409-1HL has six features. (1)Maximum rated frequency would be 133MHz. (2)Low cycle-to-cycle jitter. (3)Input to output delay, less than 200ps. (4)Internal feedback allows outputs to be synchronized. (5)Operates at 3.3V Vdd. (6)Space-saving packages 173-mil TSSOP. Those are all the main features.

Some absolute maximum ratings of PI6C2409-1HL have been concluded into several points as follow. (1)Its supply voltage to ground potential would be from -0.5V to 7.0V. (2)Its DC input voltage except CLKIN would be from -0.5V to Vdd+0.5V. (3)Its DC input voltage CLKIN would be from -0.5V to 7.0V. (4)Its storage temperature range would be from -65°C to 150°C. (5)Its maximum soldering temperature 10 seconds would be 260°C. (6)Its junction temperature would be 150°C. (7)Its static discharge voltage (per MIL-STD-883, method 3015) would be >2000V. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to device.

Also some electrical characteristics of PI6C2409-1HL are concluded as follow. (1)Its input low voltage would be max 0.8V. (2)Its input high voltage would be min 2.0V. (3)Its input low current would be max 50uA. (4)Its input high current would be max 125uA. (5)Its output low voltage would be max 0.4V. (6)Its output high voltage would be min 2.4V. (7)Its bypass, PLL OFF would be max 1mA. (8)Its supply current would be max 53mA unloaded outputs 100MHz, select inputs at Vdd or GND and would be max 39mA unloaded outputs 66MHz, CLKIN. And so on. If you have any question or suggestion or want to know more information about PI6C2409-1HL please contact us for details. Thank you!