PE4245

The PE4245 has 6 features.The first one is single 3.0 V Power Supply.The second one isLow insertion loss: 0.6 dB at 1000 MHz,0.7 dB at 2000 MHz.The third one is high isolation of 42 dB at 1000 MHz,32 dB at 2000 MHz.The fourth one is typical 1 dB compression of +27 dBm.The fifth one is single-pin CMOS logic control.The sixth one is available in a 6-lead DFN package.
The PE4245 RF Switch is designed to cover a broad range of applications from near DC to 4000 MHz. This switch integrates on-board CMOS control logic with a low voltage CMOS compatible control input. Using a +3-volt nominal power supply voltage, a 1 dB compression point of +27 dBm can be achieved. The PE4245 also exhibits excellent isolation of better than 42 dB at 1000 MHz and is offered in a small 3x3 mm DFN package.

The PE4245 is manufactured on Peregrine's UltraCMOS™ process, a patented variation of silicon-on-insulator (SOI) technology on a sapphire substrate, offering the performance of GaAs with the economy and integration of conventional CMOS.

The PE4245 has some informations about Absolute Maximum Ratings.VDD:When parameter/conditions is power supply voltage,min is -0.3, max is 4.0,units is V.VI:When parameter/conditions is Voltage on any input,min is -0.3, max is VDD+,units is V.TST:When parameter/conditions is Storage temperature range,min is -65, max is 150,units is °C.TOP:When parameter/conditions is Operating temperature,min is -40, max is 85,units is °C.

The information of PE4245 in this data sheet is believed to be reliable.However, Peregrine assumes no liability for the use of this information. Use shall be entirely at the user's own risk.No patent rights or licenses to any circuits described in this data sheet are implied or granted to any third party.Peregrine's products are not designed or intended for use in devices or systems intended for surgical implant, or in other applications of PE4245 intended to support or sustain life, or in any application in which the failure of the Peregrine product could create a situation in which personal injury or death might occur.Peregrine assumes no liability for damages, including consequential or incidental damages, arising out of the use of its products in such applications.The Peregrine name, logo, and UTSi are registered trademarks and UltraCMOS and HaRP PE4245 are trademarks of Peregrine Semiconductor Corp.