PE4243

      The PE4243 has 6 features.The first one is single-pin or complementary CMOS logic control inputs.The second one is +3.0-volt power supply needed for single-pin control mode.The third one is low insertion loss: 0.7 dB at 1000 MHz,0.9 dB at 2000 MHz.The fourth one is isolation of 30 dB at 1000 MHz, 21 dB at 2000 MHz.The fifth one is typical 1 dB compression point of +27 dBm.The sixth one is ultra-small SOT23 package.
      The PE4243 UltraCMOS™ RF Switch is designed to cover a broad range of applications from near DC through 3000 MHz.This reflective switch integrates on-board CMOS control logic with a low voltage CMOS-compatible control interface, and can be controlled using either single-pin or complementary control inputs. Using a nominal +3-volt power supply voltage, a typical input 1 dB compression point of +27 dBm can be achieved.
      The PE4243 UltraCMOS™ RF Switch is manufactured in Peregrine's patented Ultra Thin Silicon (UTSi®) CMOS process, offering the performance of GaAs with the economy and integration of conventional CMOS.
      The PE4243 has some informations about DC Electrical Specifications.When parameter is VDD Power Supply Volt-,min is 2.7,typ is 3.0, max is 3.3,units is V.When parameter is Power Supply Current (VDD = 3V, VCNTL = 3V),typ is 250, max is 500,units is nA.When parameter is Control Voltage High,min is 0.7x VDD,units is V.When parameter is Control Voltage Low,max is 0.3x VDD,units is V.   
      The information about PE4243 in this data sheet is believed to be reliable.However, Peregrine assumes no liability for the use of this information. Use shall be entirely at the user's own risk.No patent rights or licenses to any circuits described in this data sheet are implied or granted to any third party.Peregrine's products are not designed or intended for use in devices or systems intended for surgical implant, or in other applications intended to support or sustain life, or in any application in which the failure of the Peregrine product could create a situation in which personal injury or death might occur.Peregrine assumes no liability for damages, including consequential or incidental damages, arising out of the use of its products in such applications.The Peregrine name, logo, and UTSi PE4243 are registered trademarks and UltraCMOS and HaRP are trademarks of Peregrine Semiconductor Corp.