PA16A

Operating Supply Voltage :
Output Current :
Packaging :
Number of Channels : 1
Input Bias Current (Max) : 100 pA
Input Offset Voltage : 3 mV
Shutdown : No
Common Mode Rejection Ratio (Min) : 70 dB
Maximum Operating Temperature : + 85 C
Slew Rate : 20 V/us
Mounting Style : Through Hole
Package / Case : SIP-13


Features:

• HIGH POWER BANDWIDTH - 350kHz
• HIGH SLEW RATE - 20V/s
• FAST SETTLING TIME - 600ns
• LOW CROSSOVER DISTORTION - Class A/B
• LOW INTERNAL LOSSES - 1.2V at 2A
• HIGH OUTPUT CURRENT - ±5A PEAK
• LOW INPUT BIAS CURRENT - FET Input
• ISOLATED CASE - 300 VDC


Application

• MOTOR, VALVE AND ACTUATOR CONTROL
• MAGNETIC DEFLECTION CIRCUITS UP TO 5A
• POWER TRANSDUCERS UP TO 350 kHz
• AUDIO AMPLIFIERS UP TO 44W RMS


Specifications

SUPPLY VOLTAGE, +VS to VS                                      38V
OUTPUT CURRENT, within SOA                                         5A
POWER DISSIPATION, internal1                                 62.5W
INPUT VOLTAGE, differential                                 ±VS 5V
INPUT VOLTAGE, common mode                           ±VS 2V
TEMPERATURE, pin solder - 10s                                300°C
TEMPERATURE, junction1                                          150°C
TEMPERATURE RANGE, storage                   65 to +150°C
OPERATING TEMPERATURE RANGE, case     55 to +125°C


Description

The PA16 and PA16A are wideband, high output current operational amplifiers designed to drive resistive, inductive and capacitive loads. Their complementary "collector output" stage can swing close to the supply rails and is protected against inductive kickback. For optimum linearity, the output stage of PA16A is biased for class A/B operation. The safe operating area (SOA) can be observed for all operating conditions by selection of user programmable, current limiting resistors (down to 10mA). Both amplifiers of PA16A  are internally compensated but are not recommended for use as unity gain followers. For continuous operation under load, mounting on a heatsink of proper rating is recommended.

These hybrid integrated circuits utilize thick film (cermet) resistors, ceramic capacitors and semiconductor chips of PA16A to maximize reliability, minimize size and give top performance. Ultrasonically bonded aluminum wires provide reliable interconnections at all operating temperatures.

Parameters:

Technical/Catalog Information	PA16A
Vendor	Cirrus Logic Inc
Category	Integrated Circuits (ICs)
Packaging	Tube
Amplifier Type	Power
Number of Circuits	1 - Single
Package / Case	12-SIP
Slew Rate	20 V/s
Gain Bandwidth Product	4.5MHz
Current - Supply	27mA
Current - Output/Channel	5A
Voltage - Supply, Single/Dual (±)	14 V ~ 38 V, ±7 V ~ 19 V
Output Type	-
-3db Bandwidth	-
Current - Input Bias	25pA
Operating Temperature	-25°C ~ 85°C
Voltage - Input Offset	1000V
Lead Free Status	Contains Lead
RoHS Status	RoHS Non-Compliant
Other Names	PA16A PA16A 598 1310 ND 5981310ND 598-1310