PA16

Operating Supply Voltage :
Output Current :
Packaging :
Number of Channels : 1
Shutdown : No
Common Mode Rejection Ratio (Min) : 70 dB
Maximum Operating Temperature : + 85 C
Slew Rate : 20 V/us
Mounting Style : Through Hole
Input Offset Voltage : 10 mV
Input Bias Current (Max) : 200 pA
Package / Case : SIP-13


Features:

• HIGH POWER BANDWIDTH - 350kHz
• HIGH SLEW RATE - 20V/s
• FAST SETTLING TIME - 600ns
• LOW CROSSOVER DISTORTION - Class A/B
• LOW INTERNAL LOSSES - 1.2V at 2A
• HIGH OUTPUT CURRENT - ±5A PEAK
• LOW INPUT BIAS CURRENT - FET Input
• ISOLATED CASE - 300 VDC




Application

• MOTOR, VALVE AND ACTUATOR CONTROL
• MAGNETIC DEFLECTION CIRCUITS UP TO 5A
• POWER TRANSDUCERS UP TO 350 kHz
• AUDIO AMPLIFIERS UP TO 44W RMS




Specifications

SUPPLY VOLTAGE, +VS to VS 38V
OUTPUT CURRENT, within SOA5A
POWER DISSIPATION, internal1 62.5W
INPUT VOLTAGE, differential±VS5V
INPUT VOLTAGE, common mode ±VS 2V
TEMPERATURE, pin solder - 10s 300°C
TEMPERATURE, junction1150°C
TEMPERATURE RANGE, storage65 to +150°C
OPERATING TEMPERATURE RANGE, case 55 to +125°C

Output Current MAX (A)	Supply Voltage MAX (V)	Slew Rate TYP (V/s)	Standby Current MAX (mA)	Power Dissipation MAX (W)
5	38	20	40	62.5

Description

The PA16 and PA16A are wideband, high output current operational amplifiers PA16  designed to drive resistive, inductive and capacitive loads. Their complementary "collector output" stage can swing close to the supply rails and is protected against inductive kickback. For optimum linearity, the output stage is biased for class A/B operation. The safe operating area of PA16 (SOA) can be observed for all operating conditions of PA16 by selection of user programmable, current limiting resistors (down to 10mA). Both amplifiers are internally compensated but are not recommended for use as unity gain followers. For continuous operation under load, mounting on a heatsink of proper rating is recommended.

These hybrid integrated circuits utilize thick film (cermet) resistors, ceramic capacitors and semiconductor chips to maximize reliability, minimize size and give top performance. Ultrasonically bonded aluminum wires provide reliable interconnections at all operating temperatures.

The PA16 and PA16A are wideband, high output current operational amplifiers designed to drive resistive, inductive and capacitive loads. Their complementary "collector output" stage can swing close to the supply rails and is protected against inductive kickback. For optimum linearity, the output stage is biased for class A/B operation. The safe operating area of PA16 (SOA) can be observed for all operating conditions by selection of user programmable, current limiting resistors (down to 10mA). Both amplifiers are internally compensated but are not recommended for use as unity gain followers. For continuous operation of PA16 under load, mounting on a heatsink of proper rating is recommended.

These hybrid integrated circuits of PA16 utilize thick film (cermet) resistors, ceramic capacitors and semiconductor chips to maximize reliability, minimize size and give top performance. Ultrasonically bonded aluminum wires provide reliable interconnections at all operating temperatures. The Power SIP package is electrically isolated.

The PA16A is the A grade version.

Applications:

• Motor, Valve and Actuator Control
• Magnetic Deflection Circuits up to 5A
• Power Transducers up to 350 kHz
• Audio Amplifiers up to 44W RMS

Parameters:

Technical/Catalog Information	PA16
Vendor	Cirrus Logic Inc
Category	Integrated Circuits (ICs)
Packaging	Tube
Amplifier Type	Power
Number of Circuits	1 - Single
Package / Case	12-SIP
Slew Rate	20 V/s
Gain Bandwidth Product	4.5MHz
Current - Supply	27mA
Current - Output/Channel	5A
Voltage - Supply, Single/Dual (±)	14 V ~ 38 V, ±7 V ~ 19 V
Output Type	-
-3db Bandwidth	-
Current - Input Bias	50pA
Operating Temperature	-25°C ~ 85°C
Voltage - Input Offset	5000V
Lead Free Status	Contains Lead
RoHS Status	RoHS Non-Compliant
Other Names	PA16 PA16 598 1429 ND 5981429ND 598-1429