PA02A

Operating Supply Voltage :
Output Current :
Packaging :
Number of Channels : 1
Maximum Operating Temperature : + 125 C
Input Bias Current (Max) : 100 pA
Input Offset Voltage : 3 mV
Shutdown : No
Common Mode Rejection Ratio (Min) : 70 dB
Slew Rate : 20 V/us
Mounting Style : Through Hole
Package / Case : TO-3


Features:

* HIGH POWER BANDWIDTH - 350kHz
* HIGH SLEW RATE - 20V/s
* FAST SETTLING TIME - 600ns
* LOW CROSSOVER DISTORTION - Class A/B
* LOW INTERNAL LOSSES - 1.2V at 2A
* HIGH OUTPUT CURRENT - ±5A PEAK
* LOW INPUT BIAS CURRENT - FET Input
* ISOLATED CASE - 300 VDC


Application

* MOTOR, VALVE AND ACTUATOR CONTROL
* MAGNETIC DEFLECTION CIRCUITS UP TO 5A
* POWER TRANSDUCERS UP TO 350 kHz
* AUDIO AMPLIFIERS UP TO 30W RMS


Specifications

SUPPLY VOLTAGE, +VS to VS                            38V
OUTPUT CURRENT, within SOA                             5A
POWER DISSIPATION, internal                             48W
INPUT VOLTAGE, differential ±VS                        5V
INPUT VOLTAGE, common mode ±VS                  2V
TEMPERATURE, pin solder - 10s                           300°C
TEMPERATURE, junction                                       150°C
TEMPERATURE RANGE, storage                            65 to +150°C
OPERATING TEMPERATURE RANGE, case              55 to +125°C


Description

The PA02 and PA02A are wideband, high output current operational amplifiers of PA02A designed to drive resistive, inductive and capacitive loads. Their complementary "collector output"stage can swing close to the supply rails and is protected against inductive kickback. For optimum linearity, the output stage of PA02A is biased for class A/B operation. The safe operating area of PA02A (SOA) can be observed for all operating conditions by selection of user programmable, current limiting resistors(down to 10mA). Both amplifiers are internally compensated but are not recommended for use as unity gain followers. For continuous operation under load, mounting on a heatsink of proper rating is recommended.

These hybrid integrated circuits of PA02A utilize thick film (cermet)resistors, ceramic capacitors and semiconductor chips to maximize reliability, minimize size and give top performance.Ultrasonically bonded aluminum wires of PA02A provide reliable inter-connections at all operating temperatures. The 8-pin TO-3package is hermetically sealed and electrically isolated.Isolation washers are not recommended. The use of com-pressible thermal  washers and/or improper mounting torque will void the product warranty. Please see "General Operating Considerations".

Parameters:

Technical/Catalog Information	PA02A
Vendor	Cirrus Logic Inc
Category	Integrated Circuits (ICs)
Packaging	Tube
Amplifier Type	Power
Number of Circuits	1 - Single
Package / Case	TO-3-8
Slew Rate	20 V/s
Gain Bandwidth Product	4.5MHz
Current - Supply	27mA
Current - Output/Channel	5A
Voltage - Supply, Single/Dual (±)	14 V ~ 38 V, ±7 V ~ 19 V
Output Type	-
-3db Bandwidth	-
Current - Input Bias	25pA
Operating Temperature	-55°C ~ 125°C
Voltage - Input Offset	1000V
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	PA02A PA02A 598 1287 ND 5981287ND 598-1287