PA02

Operating Supply Voltage :
Output Current :
Packaging :
Number of Channels : 1
Shutdown : No
Common Mode Rejection Ratio (Min) : 70 dB
Maximum Operating Temperature : + 85 C
Slew Rate : 20 V/us
Mounting Style : Through Hole
Input Offset Voltage : 10 mV
Input Bias Current (Max) : 200 pA
Package / Case : TO-3


Features:

* HIGH POWER BANDWIDTH - 350kHz
* HIGH SLEW RATE - 20V/s
* FAST SETTLING TIME - 600ns
* LOW CROSSOVER DISTORTION - Class A/B
* LOW INTERNAL LOSSES - 1.2V at 2A
* HIGH OUTPUT CURRENT - ±5A PEAK
* LOW INPUT BIAS CURRENT - FET Input
* ISOLATED CASE - 300 VDC




Application

* MOTOR, VALVE AND ACTUATOR CONTROL
* MAGNETIC DEFLECTION CIRCUITS UP TO 5A
* POWER TRANSDUCERS UP TO 350 kHz
* AUDIO AMPLIFIERS UP TO 30W RMS




Specifications

Output Current MAX (A)	Supply Voltage MAX (V)	Slew Rate TYP (V/s)	Standby Current MAX (mA)	Power Dissipation MAX (W)
5	38	20	40	48

SUPPLY VOLTAGE, +VS to VS 38V
OUTPUT CURRENT, within SOA5A
POWER DISSIPATION, internal 48W
INPUT VOLTAGE, differential ±VS5V
INPUT VOLTAGE, common mode ±VS 2V
TEMPERATURE, pin solder - 10s 300°C
TEMPERATURE, junction 150°C
TEMPERATURE RANGE, storage 65 to +150°C
OPERATING TEMPERATURE RANGE, case 55 to +125°C




Description

The PA02 and PA02A are wideband, high output current operational amplifiers PA02 designed to drive resistive, inductive and capacitive loads. Their complementary "collector output" stage can swing close to the supply rails and is protected against inductive kickback. For optimum linearity, the output stage is biased for class A/B operation. The safe operating area of PA02 (SOA) can be observed for all operating conditions by selection of user programmable, current limiting resistors (down to 10mA). Both amplifiers are internally compensated but are not recommended for use as unity gain followers. For continuous operation under load, mounting on a heatsink of proper rating is recommended.

These hybrid integrated circuits of PA02 utilize thick film (cermet) resistors, ceramic capacitors and semiconductor chips to maximize reliability, minimize size and give top performance. Ultrasonically bonded aluminum wires provide reliable interconnections at all operating temperatures. The 8-pin TO-3 package is hermetically sealed and electrically isolated. Isolation washers are not recommended. The use of compressible thermal washers of PA02 and/or improper mounting torque will void the product warranty. Please see Application Note 1 "General Operating Considerations,"

The PA02A is the A grade version, the PA02M/883 is the certified military grade version.

Applications:

• Motor, Valve and Actuator Control
• Magnetic Deflection Circuits up to 5A
• Power Transducers up to 350 kHz
• Audio Amplifiers up to 30W RMS

The PA02 and PA02A are wideband, high output current operational amplifiers designed to drive resistive, inductive and capacitive loads. Their complementary "collector output"stage can swing close to the supply rails and is protected against inductive kickback. For optimum linearity, the output stage is biased for class A/B operation. The safe operating area (SOA) can be observed for all operating conditions by selection of user programmable, current limiting resistors(down to 10mA). Both amplifiers are internally compensated but are not recommended for use as unity gain followers. For continuous operation under load, mounting on a heatsink of proper rating is recommended.

These hybrid integrated circuits utilize thick film (cermet)resistors, ceramic capacitors and semiconductor chips to maximize reliability, minimize size and give top performance.Ultrasonically bonded aluminum wires provide reliable inter-connections at all operating temperatures. The 8-pin TO-3package is hermetically sealed and electrically isolated.Isolation washers are not recommended. The use of com-pressible thermal washers and/or improper mounting torque will void the product warranty. Please see "General Operating Considerations".

Parameters:

Technical/Catalog Information	PA02
Vendor	Cirrus Logic Inc
Category	Integrated Circuits (ICs)
Packaging	Tube
Amplifier Type	Power
Number of Circuits	1 - Single
Package / Case	TO-3-8
Slew Rate	20 V/s
Gain Bandwidth Product	4.5MHz
Current - Supply	27mA
Current - Output / Channel	5A
Voltage - Supply, Single/Dual (±)	14 V ~ 38 V, ±7 V ~ 19 V
Output Type	-
-3db Bandwidth	-
Current - Input Bias	50pA
Operating Temperature	-25°C ~ 85°C
Voltage - Input Offset	5000V
Lead Free Status	Contains Lead
RoHS Status	RoHS Compliant by Exemption
Other Names	PA02 PA02 598 1286 ND 5981286ND 598-1286