OVLLR8C7

      The OVLLR8C7,which combines a high-intensity InGaN LED with a unique flat-topped T-1¾ package to provide both high brightness and a wide spatial radiation pattern,is designed for superior performance in signage and lighting applications that require wide-angle,uniform light output.
      OVLLR8C7 has three applications.The first one is channel letter and other signage backlighting.The second one is decorative architectural indoor and outdoor lighting accents.The third one is industrial and consumer indicators.The OVLLR8C7 also has some features.The first one is that the matetial of it is AllnGaP.The second one is that the emitted color of it is red.The third one is that its intensity Typ. mcd is 570.The last one is that its lens color is water clear .
      Some absolute maximum ratings of OVLLR8C7 have been concluded as nine points which shoule be careful that the T_A=25°C otherwise noted.The first one is that the minimum of its storage temperature range should be -40°C while the maximum shoule be +100°C .The second one is that the minimum of its operating temperature should be -40°C while the maximum is 85°C.The third one is its reverse voltage should be 5V.The fourth one is that its continuous forward current should be 30 mA.The fifth one is that its peak forward current (10% Duty Cycle, 1KHz)should be 100 mA.The sixth one is that its power dissipation should be 78 mW.The seventh one is that its lead soldering temperature (5 seconds max) should be 260°C.The eighth one is that its LED junction temperature should be 125° C.The last one is that its current linearity vs. ambient temperature should be -0.5 mA/° C.And there is a note that the solder time should be less than 5 seconds at temperature(extreme).
      Attention for these important notes of OVLLR8C7.The first one is that all ranks will be included per delivery, rank ratio will be based on the chip distribution.Then The second one is that if you want to designate luminous intensity ranks, please contact OPTEK and the company will try best to help you.The last one is that its Pb content should be less than 1000 PPM.That's all the notes.