OVLKQGT6

Forward Current :
Forward Voltage :
Packaging : Bulk
Viewing Angle : 100 deg
Illumination Color : Orange
LED Size : T-1 3/4
Lens Color/Style : Diffused
Wavelength/Color Temperature : 616 nm
Luminous Intensity : 430 mcd


Features:






Specifications






Description

      The OVLKQGT6,which radiation pattern matches green (OVLKGGT6) and blue (OVLKBGT6) devices in identical packages to create LED pixels for full-color video screens,is made by OPTEK technology.It is designed for superior performance in outdoor environments.
      OVLKQGT6 has four applications.The first one is variable message signs.The second one is indoor/outdoor advertising signage.The third one is taffic and hghway sins.The last one is the full-color video signs.The OVLKQGT6 also has some features.The first one is that the matetial of it is AlInGaP.The second one is that the emitted color of it is red-orange.The third one is that its intensity Typ. mcd is 430.The last one is that its lens color is orange diffused.
      Some absolute maximum ratings of OVLKQGT6 have been concluded as seven points which shoule be careful that the TA=25°C otherwise noted.The first one is that the minimum of its storage temperature range should be -30°C while the maximum shoule be +100°C .The second one is that the minimum of its operating temperature should be -30°C while the maximum is 85°C.The third one is its reverse voltage should be 3V.The fourth one is that its continuous forward current should be 30 mA.The fifth one is that its peak forward current (10% Duty Cycle, 1KHz)should be 100 mA.The sixth one is that its power dissipation should be 80 mW.The last one is that its lead soldering temperature (5 seconds max) should be 260 °C.
      Attention for these important notes of OVLKQGT6.The first one is that all ranks will be included per delivery, rank ratio will be based on the chip distribution.Then The second one is that if you want to designate luminous intensity ranks, please contact OPTEK and the company will try best to help you.The last one is that when soldering, you should leave 2.5mm minimum clearance between the resin base and the soldering point.That's all the notes.

Parameters:

Technical/Catalog Information	OVLKQGT6
Vendor	TT Electronics/Optek Technology
Category	Optoelectronics
Color	Orange-Red
Lens Style/Size	Oval, 4mm x 2.8mm
Millicandela Rating	430mcd
Voltage - Forward (Vf) Typ	2.1V
Wavelength - Dominant	616nm
Wavelength - Peak	616nm
Current - Test	20mA
Viewing Angle	80°
Lens Type	Diffused, Orange Tinted
Luminous Flux	632 mlm
Package / Case	Radial
Mounting Type	Through Hole
Packaging	Bulk
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	OVLKQGT6 OVLKQGT6 365 1200 ND 3651200ND 365-1200