Standard LED - Through Hole Red Orange, 618nm 4500mlm, 70mA
OVFSQ4C8: Standard LED - Through Hole Red Orange, 618nm 4500mlm, 70mA
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Illumination Color : | Orange | Luminous Intensity : | 4500 mlm |
Wavelength/Color Temperature : | 618 nm | Viewing Angle : | 40 deg |
Lens Color/Style : | Water Clear | LED Size : | 7.6 mm |
Packaging : | Tube |
OVFSQ4C8 has six applications. The most important application is automotive. In this field it can be applied in rear stop, turn signal lamps and truck marker lamps. The second application is mood-setting decoration and landscape lighting. The third application is special decorative interior and exterior lighting. The fourth application is special effects stage lighting. The five applications is illumination for signs and channel letters. The last application is traffic signals, pedestrian and walkway signs.
OVFSQ4C8 has seven Maximum Ratings (TA = 25unless otherwise noted) . The temperature must range from -40 to +100°C , when OVFSQ4C8 is stored . If you want to operate it ,the temperature also must range from -40 to +100°C . The lead soldering temperature is 260°C, but at this time you have to notice two tips. One is 3mm from the base of the epoxy bulb. The other is that solder time should be less than 5 seconds at temperature extreme. The next absolute maximum ranting is reverse voltage, which is 5 V. The continuous forward current is 70 mA. At this time you should know that heat sink is adequate if the device is operated at ambient temperature higher than 25°C. For long term performance the drive currents between 10mA and 50mA are recommended. Please contact an Optek sales representative for more information on recommended drive conditions. When you use OVFSQ4C8, you ought to learn about the peak forward current, which is 200 mA in the condition of 10 % Duty Cycle and PW 100sec. At last you should pay attention that the power dissipation is 220 mW.
There are also two important notes of OVFSQ4C8. The first is all ranks will be included per delivery. Rank ratio will be based on the chip distribution. The second is that we can contact OPTEK, if we want to designate luminous intensity ranks.
Technical/Catalog Information | OVFSQ4C8 |
Vendor | TT Electronics/Optek Technology |
Category | Optoelectronics |
Color | Orange-Red |
Lens Style/Size | Round, 3mm |
Millicandela Rating | - |
Voltage - Forward (Vf) Typ | 2.6V |
Wavelength - Dominant | 618nm |
Wavelength - Peak | 618nm |
Current - Test | 70mA |
Viewing Angle | 80° |
Lens Type | Clear |
Luminous Flux | 4.5 lm |
Package / Case | 4-DIP |
Mounting Type | Through Hole |
Packaging | Tube |
Lead Free Status | Lead Free |
RoHS Status | RoHS Compliant |
Other Names | OVFSQ4C8 OVFSQ4C8 365 1166 ND 3651166ND 365-1166 |