OVFSAAC8

      OVFSAAC8 has four applications. The most important application is automotive. In this field it can be applied in rear stop, turn signal lamps and truck marker lamps. The second application is mood-setting decoration and landscape lighting. In this field OVFSAAC8 is generally applied in special decorative interior and exterior lighting and special effects stage lighting .The third application is illumination for signs and channel letters. The last application is traffic signals, pedestrian and walkway signs.
      OVFSAAC8 has seven Maximum Ratings (TA = 25unless otherwise noted) . The temperature must range from -40 to +100°C ,  when OVFSAAC8 is stored. If you want to operate it ,the temperature also must range from -40 to +100°C . The lead soldering temperature is 260°C, but at this time you have to notice two tips. One is 3mm from the base of the epoxy bulb. The other is that solder time should be less than 5 seconds at temperature extreme. The next absolute maximum ranting is reverse voltage, which is 5 V. The continuous forward current is 70 mA. At this time you should know that heat sink is adequate if the device is operated at ambient temperature higher than 25°C. For long term performance the drive currents between 10mA and 50mA are recommended. Please contact an Optek sales representative for more information on recommended drive conditions. When you use 4-Pin Amber LED Lamp ,you ought to learn about the peak forward current, which is 200 mA in the condition of 10% Duty Cycle and PW 10sec. At last you should pay attention that the power dissipation is 210 mW.