Optical Switches, Reflective, with Phototransistor Output Reflective Sensor
OPB750N: Optical Switches, Reflective, with Phototransistor Output Reflective Sensor
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
·High contrast ratio 1000 to 1 minimum
·Printed circuit board mount
·Low cost plastic housing
Storage and Op erating Tem perature Range . . . . . . . . . . . . . . . . . . . -40 to +85
Lead Sol dering Tem perature
[1/16 inch (1.6 mm) from case for 5 sec. with sol dering iron] . . . . . . . . . . . .240(2)
In put Di ode
For ward DC Cur rent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA
Peak For ward Cur rent (1 ms pulse width, 300 pps) . . . . . . . . . . . . . . . . . . . . . 3.0 A
Re verse DC Volt age. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2.0 V
Power Dis sipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mW
Out put Pho to tran sis tor
Collector- Emitter Volt age. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 V
Collector DC Cur rent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 mA
Power Dis sipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100 mW
Notes:
(1) Derate Linearly 1.67 mW/ above 25.
(2) RMA flux is recommended. Duration can be extended to 10 sec. max. when flow soldering.
(3) All parameters tested using pulse technique.
(4) Methanol or isopropanol are recommended as cleaning agents. Plastic housing is soluble in chlorinated hydrocarbons and ketones.
(5) Photocurrent is measured using an Eastman Kodak Neutral White test card having a 90% diffuse reflectance as a reflecting surface. Reference: Eastman Kodak, Catalog #1257795.
(6) IC(OFF) is the photocurrent measured with current to the input diode and a 5% reflecting
OPB755 series features a phototransistor output designed to decrease low-level light gain while not affecting the high-level light gain. Available with two mounting tabs as OPB750T.
Available with 12", 26 AWG wire leads as OPB755 series. Photologic® output sensors available in OPB760/OPB770 series.
Technical/Catalog Information | OPB750N |
Vendor | TT Electronics/Optek Technology |
Category | Sensors, Transducers |
Sensing Distance | 0.220" (5.59mm) |
Sensing Method | Reflective |
Output Type | Phototransistor |
Voltage - Collector Emitter Breakdown (Max) | 24V |
Current - Collector (Ic) (Max) | 30mA |
Current - DC Forward (If) | 50mA |
Response Time | - |
Operating Temperature | -40°C ~ 85°C |
Features | Low Cost |
Mounting Type | Through Hole |
Package / Case | PCB Mount |
Packaging | Bulk |
Lead Free Status | Lead Free |
RoHS Status | RoHS Compliant |
Other Names | OPB750N OPB750N |