OPB700AL

Series: -
Sensing Method: Reflective
Current - Collector (Ic) (Max): -
Current - DC Forward (If): 100mA
Output Type: Phototransistor
Response Time: -
Packaging: Bulk
Sensing Distance: 0.200" (5.08mm)
Mounting Type: Chassis Mount
Package / Case: Module, Pre-Wired
Manufacturer: TT Electronics/Optek Technology
Voltage - Collector Emitter Breakdown (Max): 24V


Description

The OPB700AL is one member of the OPB700 series.The OPB700 series sensor consists of an infrared emitting diode and an NPN silicon phototransistor, mounted "side-by-side" on converging optical axes, in a black plastic housing. The phototransistor responds to radiation from the emitter only when a reflective object passes within its field of view.

Features of the OPB700AL are:(1)phototransistor output; (2)low profile to facilitate stacking; (3)low cost plastic housing; (4)18.0 inch minimum length lead wire; (5)(OPB700AL).In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user's units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets.

The absolute maximum ratings of the OPB700AL can be summarized as:(1)collector-emitter voltage:25V;(2)emitter-collector voltage:5.0V;(3)reverse voltage:2.0V;(4)storage temperature:-40 to 125;(5)operating temperature:-40 to 100;(6)power dissipation:80mW.The products described in this document are designed, developed and manufactured as contemplated for general use, including without limitation, ordinary industrial use, general office use, personal use, and household use, but are not designed, developed and manufactured as contemplated (1) for any use that includes fatal risks or dangers that, unless extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal injury, severe physical damage or other loss (i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system), or (2) for any use where chance of failure is intolerable (i.e., submersible repeater and artificial satellite).

At present there is not too much information about this model.If you are willing to find more about OPB700AL, please pay attention to our web! We will promptly update the relevant information.

Parameters:

Technical/Catalog Information	OPB700AL
Vendor	TT Electronics/Optek Technology
Category	Sensors, Transducers
Sensing Distance	0.200" (5.08mm)
Sensing Method	Reflective
Output Type	Phototransistor
Voltage - Collector Emitter Breakdown (Max)	24V
Current - Collector (Ic) (Max)	-
Current - DC Forward (If)	100mA
Response Time	-
Operating Temperature	-40°C ~ 100°C
Features	High Sensitivity
Mounting Type	Chassis Mount, Wire Lead
Package / Case	Pre-Leaded
Packaging	Bulk
Lead Free Status	Lead Free
RoHS Status	RoHS Non-Compliant
Other Names	OPB700AL OPB700AL