OPB690

Series: -
Current - Collector (Ic) (Max): 30mA
Voltage - Collector Emitter Breakdown (Max): 30V
Current - DC Forward (If): 50mA
Packaging: Bulk
Sensing Distance: -
Mounting Type: Chassis Mount
Package / Case: Module, Connector
Manufacturer: TT Electronics/Optek Technology
Output Configuration: Transistor, Base-Emitter Resistor
Response Time: -
Sensing Method: Optical Flag


Features:

·Phototransistor output
·Mechanical switch replacement
·3-pin connector (Ho Tien L2561-03), Molex compatible connector 5102 series housing and 5103 series terminal
·Enhanced signal to noise ratio


Specifications

Storage and Op erating Tem perature . . . . . . . . . . . . . . . . . . . 40 to +100
In put Di ode
For ward DC Cur rent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA
Peak For ward Cur rent (1 ms pulse width, 300 pps) . . . . . . . . . . . . . . . . 3.0 A
Re verse DC Volt age. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.0 V
Power Dis sipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mW⁽¹⁾
Out put Pho to tran sis tor
Collector- Emitter Volt age. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 V
Emitter Re verse Cur rent. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 mA
Collector DC Cur rent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 mA
Power Dis sipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .200 mW⁽²⁾


Notes:
(1) Der ate line arly 1.33 mW/ above 25.
(2) Der ate line arly 2.0 mW/ above 25.
(3) "Off" condition ex ists when the lever arm is in the rest po sition (20o from ver tical) as shown in the fig ure.
(4) "On" condition ex ists when the lever arm is de flected clock wise 18o +/- 3o form the rest po sition (20o from ver tical) as shown in the fig ure.
(5) From the rest po sition to the switch point, lever torque meas ured at the end of the arm is 1.5
grams max.

Description

The OPB690 consists of an NPN phototransistor and an infrared emitting diode in a molded plastic housing. The phototransistor has an enhanced low current roll-off which improves contrast ratio and immunity to background irradiance. A lever arm actuated flag interrupts the light beam, switching the transistor output between states that can readily drive logic gates.

This OPB690 switch is designed to easily snap mount into a 0.037" ± 0.001" (0.94 mm)  thick material with a rectangular opening of 0.320" ± 0.003" x 0.472" (8.13 mm x 11.99 mm) minimum. Insertion into the punched side of metal is recommended.Customized lever arms and spring torques can be designed for specific applications.

Parameters:

Technical/Catalog Information	OPB690
Vendor	TT Electronics/Optek Technology
Category	Sensors, Transducers
Sensing Distance	-
Sensing Method	Optical Flag
Voltage - Collector Emitter Breakdown (Max)	30V
Current - Collector (Ic) (Max)	30mA
Current - DC Forward (If)	50mA
Output Configuration	Transistor, Base-Emitter Resistor
Response Time	-
Type	Unamplified
Mounting Type	Connector
Package / Case	PCB Mount
Packaging	Bulk
Operating Temperature	-40°C ~ 100°C
Lead Free Status	Lead Free
RoHS Status	RoHS Non-Compliant
Other Names	OPB690 OPB690