OPB625

Sensing Method: Transmissive
Mounting Type: Through Hole
Voltage - Supply: 4.5 V ~ 16 V
Package / Case: PCB Mount
Output Configuration: Pull-Up Resistor, Buffer
Series: Photologic®
Manufacturer: TT Electronics/Optek Technology
Sensing Distance: 0.190" (4.83mm)
Current - Supply: 5.5mA
Response Time: 30ns


Description

The OPB625 series slotted optical switches consist of an infrared emitting diode and a monolithic integrated circuit which incorporates a photodiode,a linear amplifier and a schmitt trigger on a single silicon chip.

Features of the OPB625 are:(1)non-contact switching; (2)printed circuit board mounting; (3)0.320(8.13mm)lead centers; (4)0.190(4.83mm)gap; (5)enhanced signal to noise ratio four output options.

The absolute maximum ratings of the OPB625 can be summarized as:(1)storage temperature range:-40 to 100; (2)operature temperature range:-40 to 100; (3)lead soldering temperature:240; (4)forward DC current:50mA; (5)peak forward current:3.0A; (6)reverse DC voltage:3.0V; (7)power dissipation:100mW; (8)supply voltage,Vcc:18V; (9)duration of output short to VCC:1.00sec; (10)voltage at output:30V; (11)low level output current:16mA; (12)power dissipation:240mW.

The electrical characteristics(Ta=25) of the OPB625 can be summarized as:(1)VF:1.6V MAX; (2)IR:100A MAX; (3)VCC:4.5~16.0V.If you want to know more information such as the electrical characteristics ,please download the datasheet in www.seekdatasheet.com .

Parameters:

Technical/Catalog Information	OPB625
Vendor	TT Electronics/Optek Technology
Category	Sensors, Transducers
Sensing Distance	0.190" (4.83mm)
Sensing Method	Transmissive
Output Configuration	Pull-Up Resistor, Buffer
Mounting Type	Through Hole
Current - Supply	5.5mA
Voltage - Supply	4.5 V ~ 16 V
Package / Case	PCB Mount
Features	Non Contact Switching
Response Time	30ns
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	OPB625 OPB625 365 1090 ND 3651090ND 365-1090