OPB615

Sensing Method: Transmissive
Mounting Type: Through Hole
Voltage - Supply: 4.5 V ~ 16 V
Package / Case: PCB Mount
Output Configuration: Pull-Up Resistor, Buffer
Series: Photologic®
Manufacturer: TT Electronics/Optek Technology
Current - Supply: 5.5mA
Response Time: 30ns
Sensing Distance: 0.150" (3.81mm)


Description

The OPB615 series slotted optical switches consist of an infrared emitting diode and a monolithic integrated circuit which incorporates a photodiode, a linear amplifier and a Schmitt trigger on a single silicon chip. Open collector output versions can drive up to 10 TTL loads over a voltage range from 4.5V to 16V. The sensors feature TTL/LSTTL compatible logic level output.

The features of OPB615 can be summarized as (1)non-contact switching; (2)printed circuit board mounting; (3)0.275" (6.99 mm) lead centers; (4)0.150" (3.81 mm) gap; (5)enhanced signal to noise ratio; (6)four output options.

The absolute maximum ratings of OPB615 are (1)storage and operating temperature: -40 to +100°C; (2)lead soldering temperature [1/16 inch (1.6 mm) from case for 5 sec. with soldering iron]: 240°C(RMA flux is recommended. Duration can be extended to 10 sec. max when flow soldering.); (3)forward DC current: 50 mA; (4)peak forward current (1 us pulse width, 300 pps): 3.0 A; (5)reverse DC voltage: 3.0V; (6)power dissipation: 100 mW(2: Derate linearly 1.33mW/°C above 25°C); (7)supply voltage, VCC: 18V; (8)voltage at output: 30V; (9)power dissipation: 240mW(3: derate linearly 2.50mW/°C above 25°C); (10)low level output current: 16mA.

Parameters:

Technical/Catalog Information	OPB615
Vendor	TT Electronics/Optek Technology
Category	Sensors, Transducers
Sensing Distance	0.150" (3.81mm)
Sensing Method	Transmissive
Output Configuration	Pull-Up Resistor, Buffer
Mounting Type	Through Hole
Current - Supply	5.5mA
Voltage - Supply	4.5 V ~ 16 V
Package / Case	PCB Mount
Features	Non Contact Switching
Response Time	30ns
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	OPB615 OPB615