Features: ` ZERØ-CROSSOVER` LOW POWER: 1A (max)` LOW OFFSET VOLTAGE: 750V (max)` LOW VOLTAGE SUPPLY: +1.8V to +5.5V` LOW OFFSET DRIFT: 1.75V/°C (max)` microSIZE PACKAGES: SC70-5, SOT23-8, MSOP-8Application· BATTERY-POWERED INSTRUMENTS· PORTABLE DEVICES· MEDICAL INSTRUMENTS· TEST EQUIPMENTPi...
OPA2369: Features: ` ZERØ-CROSSOVER` LOW POWER: 1A (max)` LOW OFFSET VOLTAGE: 750V (max)` LOW VOLTAGE SUPPLY: +1.8V to +5.5V` LOW OFFSET DRIFT: 1.75V/°C (max)` microSIZE PACKAGES: SC70-5, SOT23-8, MSO...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $.62 - .64 / Piece
Operational Amplifiers - Op Amps 2.2nV/rtHz,18MHz, Prec,RRO,36V Op Amp
VALUE |
UNIT | ||
Supply Voltage, VS = (V+) (V) |
7V |
V | |
Single Input Terminals | Voltage(2) |
0.5 to (V+) + 0.5 |
V |
Current(2) |
±10 |
mA | |
Output Short-Circuit(3) |
Continuous | ||
Operating Temperature,TA |
55 to +125 |
°C | |
Storage Temperature,TA |
65 to +150 |
°C | |
Junction Temperature,TJ |
+150 |
°C | |
ESD Ratings | Human Body Model (HBM) |
4000 |
V |
Charged Device Model (CDM) |
1000 |
V | |
Machine Model (MM) |
200 |
V |
(1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those specified is not supported.
(2) Input terminals are diode-clamped to the power-supply rails. Input signals that can swing more than 0.5V beyond the supply rails should be current limited to 10mA or less.
(3) Short-circuit to VS/2, one amplifier per package.
The OPA369 and OPA2369 are new low-power,low-voltage operational amplifiers from Texas Instruments designed especially for battery-powered applications.
The OPAx369 operates on a supply voltage as low as 1.8V and has true rail-to-rail operation that makes it useful for a wide range of applications. The zero-crossover feature resolves the problem of input crossover distortion that becomes very prominent in low voltage (< 3V), rail-to-rail input applications.
In addition to microsize packages and very low quiescent current (1A, max) the OPAx369 features 12kHz bandwidth, low offset drift (1.75V/°C, max),and low 0.1Hz to 10Hz noise (3.6VPP).
The OPA369 (single version, available Q4 2007) is offered in an SC70-5 package. The OPA2369 (dual version) comes in both MSOP-8 and SOT23-8 packages.