Features: UNITY-GAIN BANDWIDTH: 450MHz WIDE BANDWIDTH: 200MHz GBW HIGH SLEW RATE: 360V/µs LOW NOISE: 5.8nV/HZ EXCELLENT VIDEO PERFORMANCE: DIFF GAIN: 0.02%, DIFF PHASE: 0.05° 0.1dB GAIN FLATNESS: 75MHzINPUT RANGE INCLUDES GROUND RAIL-TO-RAIL OUTPUT (within 100mV) LOW INPUT BIAS CURRENT: 3pA...
OPA2356: Features: UNITY-GAIN BANDWIDTH: 450MHz WIDE BANDWIDTH: 200MHz GBW HIGH SLEW RATE: 360V/µs LOW NOISE: 5.8nV/HZ EXCELLENT VIDEO PERFORMANCE: DIFF GAIN: 0.02%, DIFF PHASE: 0.05° 0.1dB GAIN FLATN...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $.62 - .64 / Piece
Operational Amplifiers - Op Amps 2.2nV/rtHz,18MHz, Prec,RRO,36V Op Amp
Supply Voltage, V+ to V..................................................................... 7.5V
Signal Input Terminals, Voltage(2).................... (V) 0.5V to (V+) + 0.5V
Current(2)...........................................................................................10mA
Output Short-Circuit(3)..............................................................Continuous
Operating Temperature....................................................55°C to +150°C
Storage Temperature.......................................................65°C to +150°C
Junction Temperature......................................................................+160°C
Lead Temperature (soldering, 10s).................................................+300°C
NOTE: (1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those specified is not implied. (2) Input terminals are diode-clamped to the power-supply rails. Input signals that can swing more than 0.5V beyond the supply rails should be current limited to 10mA or less. (3) Short-circuit to ground one amplifier per package.
The OPAx356 series high-speed, voltage-feedback CMOS operational amplifiers are designed for video and other applications requiring wide bandwidth. The OPAx356 is unity gain stable and can drive large output currents. Differential gain is 0.02% and differential phase is 0.05°. Quiescent current is only 8.3mA per channel.
OPAx356 is optimized for operation on single or dual supplies as low as 2.5V (±1.25V) and up to 5.5V (±2.75V). Common-mode input range for the OPAx356 extends 100mV below ground and up to 1.5V from V+. The output swing is within 100mV of the rails, supporting wide dynamic range.
The OPAx356 series is available in single (SOT23-5 and SO-8), and dual (MSOP-8 and SO-8) versions. Multichannel versions feature completely independent circuitry for lowest crosstalk and freedom from interaction. All are specified over the extended 40°C to +125°C range.