High Speed Operational Amplifiers Hi-Spd Single-Sply Rail-to-Rail
OPA2350UAG4: High Speed Operational Amplifiers Hi-Spd Single-Sply Rail-to-Rail
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $.62 - .64 / Piece
Operational Amplifiers - Op Amps 2.2nV/rtHz,18MHz, Prec,RRO,36V Op Amp
Voltage Gain dB : | 122 dB | Input Offset Voltage : | 0.5 mV |
Slew Rate : | 22 V/us | Operating Supply Voltage : | 5.5 V |
Supply Current : | 15 mA | Maximum Operating Temperature : | + 85 C |
Mounting Style : | SMD/SMT | Package / Case : | SOIC-8 |
Packaging : | Tube |
The OPA2350UAG4 is one member of the OPA2350 series.The Si5321 is a precision clock multiplier that exceeds the requirements of high-speed communication systems, including OC-192/OC-48 and 10 Gigabit Ethernet. This device phase locks to an input clock in the 19, 39, 78, 155, 311 or 622 MHz frequency range and generates a frequency-multiplied clock output that can be configured for operation in the 19, 39, 78, 155, 622, 1244, or 2488 MHz frequency range. Silicon Laboratories DSPLL(TM) technology provides PLL functionality with unparalleled performance.
Features of the OPA2350UAG4 are:(1)rail-to-rail input; (2)rail-to-rail output (within 10mV); (3)wide bandwidth: 38MHz; (4)high slew rate: 22V/s; (5)low noise: 5nV/Hz; (6)low thd+noise: 0.0006%; (7)unity-gain stable; (8)microsize packages; (9)single, dual, and quad.The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
The absolute maximum ratings of the OPA2350UAG4 can be summarized as:(1)supply voltage:7.0V;(2)signal input terminals current:10mA;(3)lead temperature:300;(4)storage temperature:-55 to 150;(5)operating temperature:-55 to 150.Stresses above these ratings may cause permanent damage.Exposure to absolute maximum conditions for extended periods may degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those specified is not implied.This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
Technical/Catalog Information | OPA2350UAG4 |
Vendor | Texas Instruments |
Category | Integrated Circuits (ICs) |
Packaging | Tube |
Amplifier Type | General Purpose |
Number of Circuits | 2 - Dual |
Package / Case | 8-SOIC (3.9mm Width) |
Slew Rate | 22 V/s |
Gain Bandwidth Product | 38MHz |
Current - Supply | 5.2mA |
Current - Output / Channel | 40mA |
Voltage - Supply, Single/Dual (±) | 2.5 V ~ 5.5 V |
Output Type | Rail-to-Rail |
-3db Bandwidth | - |
Current - Input Bias | 0.5pA |
Operating Temperature | -40°C ~ 85°C |
Voltage - Input Offset | 150V |
Drawing Number | 296; 4040047-2; D; 8 |
Lead Free Status | Lead Free |
RoHS Status | RoHS Compliant |
Other Names | OPA2350UAG4 OPA2350UAG4 |