OPA2336P

Output Current :
Input Bias Current (Max) : 10 pA
Number of Channels : 2
Common Mode Rejection Ratio (Min) : 80 dB
Packaging : Tube
Shutdown : No
Maximum Operating Temperature : + 85 C
Mounting Style : Through Hole
Package / Case : PDIP-8
Slew Rate : 0.03 V/us
Operating Supply Voltage : 5.5 V
Input Offset Voltage : 0.125 mV


Description

The OPA2336P belongs to OPA336 series micropower CMOS operational amplifiers which are designed for battery powered applications. Dual and quad designs feature completely independent circuitry for lowest crosstalk and freedom from interaction. They operate on a single supply with operation as low as 2.1V. The output is rail-to-rail and swings to within 3mV of the supplies with a 100k load. OPA336 packages are the tiny 5-lead SOT-23-5 surface mount, SO-8 surface-mount, and 8-pin DIP. OPA2336 comes in the miniature MSOP-8 surface-mount, SO-8 surface-mount, and 8-pin DIP packages. OPA4336 packages are the space-saving SSOP-16 surface-mount and the 14-pin DIP. All are specified from -40°C to +85°C and operate from -55°C to +125°C. A macromodel is available for design analysis. The commonmode range extends to the negative supply-ideal for single-supply applications. Single, dual, and quad versions have identical specifications for maximum design flexibility. In addition to small size and low quiescent current (20A/amplifier), they feature low offset voltage (125V max), low input bias current (1pA), and high open-loop gain (115dB).

the features of OPA2336P can be summarized as (1)single supply operation; (2)rail-to-rail output (within 3mV); (3)micropower: IQ = 20A/amplifier; (4)microsize packages; (5)low offset voltage: 125V max; (6)specified from vs = 2.3V to 5.5V; (7)single, dual, and quad versions.

The absolute maximum ratings of OPA2336P are (1)supply voltage: 5.5V; (2)signal input terminals, voltage (2): (V) 0.3V to (V+) +0.3V/current (2): 10mA; (3)output short-circuit (3): continuous; (4)operating temperature: 55°C to +125°C; (5)storage temperature: 55°C to +125°C; (6)junction temperature: 150°C; (7)lead temperature (soldering, 10s): 300°C(NOTES: (1) Stresses above these ratings may cause permanent damage. (2) Input terminals are diode-clamped to the power supply rails. Input signals that can swing more than 0.3V beyond the supply rails should be current- limited to 10mA or less. (3) Short-circuit to ground, one amplifier per package.).

Parameters:

Technical/Catalog Information	OPA2336P
Vendor	Texas Instruments
Category	Integrated Circuits (ICs)
Packaging	Tube
Amplifier Type	General Purpose
Number of Circuits	2 - Dual
Package / Case	8-DIP (300 mil)
Slew Rate	0.03 V/s
Gain Bandwidth Product	100kHz
Current - Supply	20A
Current - Output / Channel	5mA
Voltage - Supply, Single/Dual (±)	2.3 V ~ 5.5 V
Output Type	Rail-to-Rail
-3db Bandwidth	-
Current - Input Bias	1pA
Operating Temperature	-40°C ~ 85°C
Voltage - Input Offset	60V
Drawing Number	296; 4040082; P; 8
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	OPA2336P OPA2336P