OP07CP

Output Current :
Number of Channels : 1
Packaging : Tube
Common Mode Rejection Ratio (Min) : 100 dB
Shutdown : No
Input Offset Voltage : 0.15 mV
Mounting Style : Through Hole
Package / Case : PDIP-8
Slew Rate : 0.3 V/us
Maximum Operating Temperature : + 70 C
Input Bias Current (Max) : 7 nA
Operating Supply Voltage : 36 V


Pinout




Description

The OP07CP is one member of the OP07 series.It has the following features including (1)Low VOS: 75 V maximum;(2)Low VOS drift: 1.3 V/°C maximum;(3)Ultrastable vs. time: 1.5 V per month maximum;(4)Low noise: 0.6 V p-p maximum.The OP07 has very low input offset voltage (75 V maximum for OP07E) that is obtained by trimming at the wafer stage. These low offset voltages generally eliminate any need for external nulling. The OP07 also features low input bias current (±4 nA for the OP07E) and high open-loop gain (200 V/mV for the OP07E). The low offset and high open-loop gain make the OP07 particularly useful for high gain instrumentation applications.

The OP07CP wide input voltage range of ±13 V minimum combined with a high CMRR of 106 dB (OP07E) and high input impedance provide high accuracy in the noninverting circuit configuration. Excellent linearity and gain accuracy can be maintained even at high closed-loop gains. Stability of offsets and gain with time or variations in temperature is excellent. The accuracy and stability of the OP07, even at high gain, combined with the freedom from external nulling have made the OP07 an industry standard for instrumentation applications.The OP07 is available in two standard performance grades. The OP07E is specified for operation over the 0°C to 70°C range, and the OP07C is specified over the -40°C to +85°C temperature range.

OP07CP Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Although this product features proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality.

Parameters:

Technical/Catalog Information	OP07CP
Vendor	Texas Instruments
Category	Integrated Circuits (ICs)
Packaging	Tube
Amplifier Type	General Purpose
Number of Circuits	1 - Single
Package / Case	8-DIP (300 mil)
Slew Rate	0.3 V/s
Gain Bandwidth Product	600kHz
Current - Supply	-
Current - Output / Channel	-
Voltage - Supply, Single/Dual (±)	±3 V ~ 18 V
Output Type	-
-3db Bandwidth	-
Current - Input Bias	1.8nA
Operating Temperature	0°C ~ 70°C
Voltage - Input Offset	60V
Drawing Number	296; 4040082; P; 8
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	OP07CP OP07CP 296 12853 5 ND 296128535ND 296-12853-5