Features: ·Direct Correspondence between Display Data RAM and LCD Pixel·Display Data RAM - 21,120 bits (1.5 times over than display size)·236 LCD Drivers - 104-common and 132-segment·Direct Microprocessor Interface for both of 68 and 80 type MPU Serial Interface·Partial Display Function·(2 blocks ...
NJU6678: Features: ·Direct Correspondence between Display Data RAM and LCD Pixel·Display Data RAM - 21,120 bits (1.5 times over than display size)·236 LCD Drivers - 104-common and 132-segment·Direct Micropro...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
PARAMETER | SYMBOL | RATINGS | UNITS |
Supply Voltage (1) | VDD | -0.3 to +5.0 | V |
Supply Voltage (2) | V5 | VDD-17.0 to VDD+0.3 | V |
Supply Voltage (3) | V1 to V4 | V5 to VDD+0.3 | V |
Input Voltage | VIN | -0.3 to VDD+0.3 | V |
Operating Temperature | Topr | -30 to +80 | |
Storage Temperature | Tstg | -55 to +125 (Chip) | |
-55 to +100 (TCP) |
Note 1) If the LSI are used on condition above the absolute maximum ratings, the LSI may be destroyed. Using the LSI within electrical characteristics is strongly recommended for normal operation. Use beyond the electric characteristics conditions will cause malfunction and poor reliability.
Note 2) All voltage values are specified as V VSS SS=0 V.
Note 3) The relation : V VDD DD > V V1 > V V2 > V V3 > V V4 > V V5 ; V VDD DD > V VSS SS > V VOUT OUT must be maintained. Note 4) Decoupling capacitor should be connected between V VDD DD and V VSS SS due to the stabilized operation for the voltage converter.
The NJU6678 is a bit map LCD driver to display graphics or charac- characters. It contains 21,120 bits display data RAM, microprocessor inter- ters. interface circuits, instruction decoder, 132-segment and 104-common driv- face drivers. ers. The bit image display data is transferred to the display data RAM by serial or 8-bit parallel interface. The NJU6678 displays 104 x 132 dots graphics or 8-character 6-line by 16 x 16 dots character.
NJU6678 oscillates by built-in OSC circuit without any external components. Furthermore, the NJU6678 features Partial Display Function which creates up to 2 blocks of active display area and optimizes duty cycle ratio. This function sets optimum boosted voltage by the combination with both of programmable 5-time voltage booster circuit and 201- step electrical variable resistor. As result, NJU6678 reduces the operating cur- current. rent.
The operating voltage of NJU6678 from 2.5V to 3.3V and low operating current are useful for small size battery operating items.