Features: · 16-character 3-line Dot Matrix LCD Controller Driver· Serial Direct Interface with Microprocessor· Display Data RAM :48 x 8 bits : Maximum 16-character 3line Display· Character Generator ROM :10,200 bits ; 255 characters for 5 x 8 dots· Character Generator RAM :8 x 5 bits ; 1 Patterns(...
NJU6637: Features: · 16-character 3-line Dot Matrix LCD Controller Driver· Serial Direct Interface with Microprocessor· Display Data RAM :48 x 8 bits : Maximum 16-character 3line Display· Character Generator...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
PARAMETER | SYMBOL | RATINGS | UNIT |
Supply Voltage(1) | VDD | -0.3 to +7.0 | V |
Supply Voltage(2) | VLCD | VDD-7.0 to VDD+0.3 | V |
Input Voltage | VIN | -0.3 to VDD+0.3 | V |
Operating Temperature | Topr | -40 to +85 | °C |
Storage Temperature | Tstg | -40 to +125 | °C |
The NJU6637 is a 1Chip Dot Matrix LCD controller driver for up to 16-character 3-line display.
NJU6637 contains microprocessor Interface circuits, Instruction decoder controller, character generator ROM/RAM and common and segment drivers.
The bleeder resistance of NJU6637 generates for LCD Bias voltage Internally.
The CR oscillator of NJU6637 Incorporates C and R, therefore no external components for oscillation are required.
The microprocessor NJU6637 Interface circuits which operate 1MHz frequency, can be connected directly to serial I/F microprocessor.
The character of NJU6637 generator consists of 10,200 bits ROM and 8 x 5 bits RAM. The standard version ROM is coded with 255 characters including capital and small letter fonts.
The 24-common and 80-segment drive up to 16-character 3-line LCD panel which divided two common electrode blocks.
The rectangle outlook is very applicable to COG.