Features: • Data Rates from 4kbps to 64kbps• Full or Half Duplex Gaussian Minimum Shift Keying (GMSK) Operation• Selectable BT: (0.3 or 0.5)• Low Power 3.0V, 20kbps, 1.5mA typ. 5.0V, 64kbps, 4.0mA typ.• Low Current Non-DSP Solution• Small TSSOP size fits PCMCIA ...
MX589: Features: • Data Rates from 4kbps to 64kbps• Full or Half Duplex Gaussian Minimum Shift Keying (GMSK) Operation• Selectable BT: (0.3 or 0.5)• Low Power 3.0V, 20kbps, 1.5mA ty...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
General |
Notes |
Min. |
Typ. |
Max. |
Units |
Supply (VDD-VSS) |
-0.3 |
7.0 |
V | ||
Voltage on any pin to VSS |
-0.3 |
VDD + 0.3 |
V | ||
Current | |||||
VDD |
-30 |
30 |
mA | ||
VSS |
-30 |
30 |
mA | ||
Any other pins |
-20 |
20 |
mA | ||
DW / P Packages | |||||
Total allowable Power issipation at TAMB = 25 |
800 |
mW | |||
Derating above 25 |
13 |
mW/ above 25 | |||
Operating Temperature |
-40 |
85 |
| ||
Storage Temperature |
-55 |
125 |
| ||
TN Package | |||||
Total allowable Power dissipation at TAMB = 25 |
550 |
mW | |||
Derating above 25 |
9 |
mW/ above 25 | |||
Operating Temperature |
-40 |
85 |
| ||
Storage Temperature |
-55 |
125 |
|
The MX589 is a single-chip synchronous modem designed for Wireless Data Applications. Employing Gaussian Minimum shift Keying (GMSK) baseband modulation, the MX589 features a wide range of available data rates: 4k to 64kbps. Data Rates and the choice of BT (0.3 or 0.5) are pin programmable to provide for different system requirements.
The Tx and Rx digital data interfaces are bit serial, synchronized to Tx and Rx data clocks generated by the modem. Separate Tx and Rx Powersave inputs allow full or half-duplex operation. Rx input levels can be set by suitable AC and DC level adjusting circuitry built with external components around an on-chip Rx Input Amplifier.
Acquisition, Lock, and Hold of Rx data signals are made easier and faster by the use of Rx Control Inputs to clamp, detect, and /or hold input data levels and can be set by the µProcessor as required. The Rx S/N output provides an indication of the quality of the received signal.
The MX589 may be used with a 3.0V to 5.5V power supply and is available in the following packages: 24-pin TSSOP (MX589TN), 24-pin SOIC (MX589DW), and 24-pin PDIP (MX589P).