MPC8XXFADS

The MPC8XXFADS is meant to become a general platform for s/w and h/w development around the MPC8XX family. Using its on-board resources and its associated debugger, the developer is able to load his code, run it, set breakpoints, display memory and registers and connect his own proprietary h/w via the expansion connectors, to be incorporated to a system with the MPC.

The MPC8XXFADS has the following features include:(1)4 MByte, unbuffered, synchronous dram on-board;(2)4 MByte EDO 60nsec delay DRAM SIMM. Support for 4 - 32 MByte FPM or EDO Dram SIMM, with automatic dram SIMM identification.16 bit data-bus width support;(3)2 MByte Flash SIMM. support for upto 8 MByte, 5V or 12V programmable, with automatic flash SIMM identification;(4)memory disable option for each local memory map slaves;(5)board control & status register - bcsr, controlling board's operation;(6)Programmable Hard-Reset Configuration via BCSR;(7)5V only PCMCIA socket with full buffering, power control and port disable option.complies with PCMCIA 2.1+ standard;(8)module enable indications;(9)10-Base-T port on-board, with stand-by mode.

The absolute maximum ratings of the MPC8XXFADS are:(1)operating temperature:-0 to -30°C;(2)storage temperature range: -25 to +85°C;(3)relative humidity:5% to 90%(non-condensing);(4)power requirements(no other boards attached):+5Vdc@1.7A(typical),3A,+12Vdc-@1A.When either the local MPC is removed from its socket or the daughter board is removed from the FADS, all FADS's modules are inaccessible, except for the debug-port controller.All module-enable indications are darkened, regardless of their associated enable bits in the BCSR. Pull-up resistors are connected to Chip-Select lines, so they do not float when the MPC is removed from its socket, avoiding possible contention over data-bus lines.The pins on the standard debug port connector are the maximal group needed to support debug port controllers for both the MPC5XX and MPC8XX families. Some of the pins are redundant for the MPC8XX family but are necessary for the MPC5XX family.

At present there is not too much information about this model.If you are willing to find more  about MPC8XXFADS, please pay attention to our web! We will promptly update the relevant information.