ML6652

Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied.
Junction Temperature .............................................. 150ºC
Storage Temperature Range ..................... -65ºC to 150ºC
Lead Temperature (Soldering, 10s) ......................... 240ºC
Thermal Resistance (JA) ..................................... 67°C/W
Input Voltage Range .............. Ground - 0.3V to VCC +0.3V
Output Current
TPOUTP/TPOUTN....................................................... 80mA
IOUT ...................................................................... 120mA
IOUT# ................................................................... -100mA
All other inputs ......................................................... 10mA
Power Supply Voltage Range .............................3.3V ±5%
All VCC supply pins must be within 0.1V of each other
Operating Ambient Temperature Range ......... 0ºC to 70ºC

The ML6652 is a low cost/low LED current drive single chip Media Converter that provides 10Mbps and 100Mbps signal conversion between twisted pair and fiber optic Ethernet technologies. The ML6652 supports conversion between:
10Base-T and 10Base-FL
100Base-TX and 100Base-FX/SX
100Base-FX and 100Base-SX FLP
Bursts and FLNP Bursts 
The ML6652 supports 10Mbps and 100Mbps operating data rates with Auto Negotiation using 850nm or 1300nm optics. One or both of the fiber optic and twisted pair interfaces can be interfaced to industry standard miniature fiber optic components or Physical Media Dependent (PMD) modules using Positive Emitter Coupled Logic/Low Voltage Positive Emitter Coupled Logic (PECL/LVPECL) compatible modes. Other wavelengths possible via PECL/LVPECL interface.