Specifications Parameter Symbol Value Unit Peak Repetitive OffState Voltage(1)(TJ = 40 to +125°C, Gate Open)MCR692MCR693 VDRMVRRM 50100 Volts Peak Discharge Current(2) ITM 750 A On-State RMS Current(180° Conduction Angles; TC = 85°C) IT(RMS)...
MCR692: Specifications Parameter Symbol Value Unit Peak Repetitive OffState Voltage(1)(TJ = 40 to +125°C, Gate Open)MCR692MCR693 VDRMVRRM 50100 Volts Peak Discharge Curre...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Parameter |
Symbol |
Value |
Unit |
Peak Repetitive OffState Voltage(1) (TJ = 40 to +125°C, Gate Open) MCR692 MCR693 |
VDRM VRRM |
50 100 |
Volts |
Peak Discharge Current(2) |
ITM |
750 |
A |
On-State RMS Current (180° Conduction Angles; TC = 85°C) |
IT(RMS) |
25 |
A |
Average On-State Current (180° Conduction Angles; TC = 85°C) |
IT(AV) |
16 |
A2sec |
Peak Non-Repetitive Surge Current (1/2 Cycle, Sine Wave, 60 Hz, TJ = 125°C) |
ITSM |
300 |
Watts |
Circuit Fusing Considerations (t = 8.3 ms) |
I2t |
375 |
Watts |
Forward Peak Gate Current (Pulse Width 1.0 s, TC = 80°C) |
IGM |
2.0 |
A |
Forward Peak Gate Power |
PGM |
20 |
Watts |
Forward Average Gate Power |
PG(AV) |
0.5 |
Watt |
Operating Junction Temperature Range |
TJ |
40 to +125 |
°C |
Storage Temperature Range |
Tstg |
40 to +150 |
°C |
Mounting Torque |
- |
8.0 |
in. lb. |
1. VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage; however, positive gate voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are xceeded.
2. Ratings apply for tw = 1 ms. See Figure 1 for ITM capability for various duration of an exponentially decaying current waveform, tw is defined as 5 time constants of an exponentially decaying current pulse.