Position: Home  > All Categories> Integrated Circuits (ICs) > MBM29SL800BD

MBM29SL800BD

Features: • Single 1.8 V read, program, and erase Minimizes system level power requirements• Compatible with JEDEC-standard commands Uses same software commands as E2PROMs• Compatible with JEDEC-standard world-wide pinouts 48-pin TSOP (I) (Package suffix : TN − Normal Bend ...

product image

MBM29SL800BD Picture
See larger image
SeekIC No. : 004414195 Detail

MBM29SL800BD: Features: • Single 1.8 V read, program, and erase Minimizes system level power requirements• Compatible with JEDEC-standard commands Uses same software commands as E2PROMs• Compati...

MBM29SL800BD Data Sheet

floor Price/Ceiling Price

Get Latest Price
Part Number:
MBM29SL800BD
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2024/11/27

add to my favourite

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

• Single 1.8 V read, program, and erase
   Minimizes system level power requirements
• Compatible with JEDEC-standard commands
   Uses same software commands as E2PROMs
• Compatible with JEDEC-standard world-wide pinouts
   48-pin TSOP (I)  (Package suffix : TN − Normal Bend Type, TR − Reversed Bend Type)
   48-ball FBGA (Package suffix : PBT)
   48-ball SCSP (Package suffix : PW)
• Minimum 100,000 program/erase cycles
• High performance
   100 ns maximum access time
• Sector erase architecture
   One 8 Kword, two 4 Kwords, one 16 Kword, and fifteen 32 Kwords sectors in word mode
   One 16 Kbyte, two 8 Kbytes, one 32 Kbyte, and fifteen 64 Kbytes sectors in byte mode
   Any combination of sectors can be concurrently erased. Also supports full chip erase
• Boot Code Sector Architecture
   T = Top sector
   B = Bottom sector
• Embedded EraseTM Algorithms
   Automatically pre-programs and erases the chip or any sector
• Embedded ProgramTM Algorithms
   Automatically writes and verifies data at specified address
•Data Polling and Toggle Bit feature for detection of program or erase cycle completion
• Ready/Busy output (RY/BY) 
   Hardware method for detection of program or erase cycle completion
• Automatic sleep mode
   When addresses remain stable, automatically switch themselves to low power mode
• Erase Suspend/Resume
   Suspends the erase operation to allow a read in another sector within the same device
• Sector protection
   Hardware method disables any combination of sectors from program or erase operations
• Sector Protection set function by Extended sector Protect command
• Fast programming Function by Extended Command
• Temporary sector unprotection
   Temporary sector unprotection via the RESET pin

Embedded EraseTM and Embedded ProgramTM are trademarks of Advanced Micro Devices, Inc.


Specifications

Symbol Parameter Rating Unit
min. max.
Tstg Storage Temperature -55 +125
TA Ambient Temperature with Power Applied -40 +85
VIN, VOUT Voltage with Respect to Ground All pins except A9,
OE, and RESET *1, *2		 -0.5 VCC + 0.5 V
VIN A9, OE, and RESET *1, *3 -0.5 +11.5 V
VCC Power Supply Voltage *1 -0.5 +3.0 V

*1: Voltage is defined on the basis of VSS = GND = 0 V.
*2:Minimum DC voltage on input or I/O pins is −0.5 V. During voltage transitions, input or I/O pins may undershoot VSS to −2.0 V for periods of up to 20 ns. Maximum DC voltage on input or I/O pins is VCC + 0.5 V. During voltage transitions, input or I/O pins may overshoot to VCC + 2.0 V for periods of up to 20 ns.
*3:Minimum DC input voltage on A9, OE and RESET pins is −0.5 V. During voltage transitions, A9, OE and RESET pins may undershoot VSS to −2.0 V for periods of up to 20 ns. Voltage difference between input and supply voltage (VIN - VCC) does not exceed +9.0 V. Maximum DC input voltage on A9, OE and RESET pins is +11.5 V which may overshoot to +12.5 V for periods of up to 20 ns.
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,  temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.




Description

The MBM29SL800BD are a 8 M-bit, 1.8 V-only Flash memory organized as 1 Mbytes of 8 bits each or 512 Kwords of 16 bits each. The MBM29SL800TD/BD are offered in a 48-pin TSOP (I) , 48-ball FBGA and 48-ball SCSP packages. These devices are designed to be programmed in-system with the standard system 3.0 V VCC supply. 12.0 V VPP and 5.0 V VCC are not required for write or erase operations. MBM29SL800BD can also be repro-grammed in standard EPROM programmers.




Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
You may also be interested in :
Prototyping Products
AVT4168
DE1
Potentiometers, Variable Resistors
RV24YN
WXD4-23-3W
Test Equipment
TOP853
TOP2005
Boxes, Enclosures, Racks
ACLSN12
ACLJIC
Hardware, Fasteners, Accessories
MF-A02
LMS700KF07
Crystals and Oscillators
WT325BI0030.000000
2SB49
View more