Features: ` HIGH SPEED tPD = 14 ns (TYP.) at VCC = 5V ` LOW POWER DISSIPATION ICCH = 200 A (TYP.) at TA = 25 oC ` COMPATIBLE WITH TTL OUTPUTS VIH = 2V (MIN.) VIL = 0.8V (MAX) `CURRENT SOURCES ON DATA INPUTS ELIMINATE THE NEED OF EXTERNAL PULL UP RESISTORS ` OUTPUT DRIVE CAPABILITY 15 LSTTL LOADS `...
M74HCT240PU: Features: ` HIGH SPEED tPD = 14 ns (TYP.) at VCC = 5V ` LOW POWER DISSIPATION ICCH = 200 A (TYP.) at TA = 25 oC ` COMPATIBLE WITH TTL OUTPUTS VIH = 2V (MIN.) VIL = 0.8V (MAX) `CURRENT SOURCES ON DAT...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Symbol | Parameter |
Value |
Unit |
VCC | Supply Voltage |
-0.5 to +7 |
V |
VI | DC Input Voltage |
-0.5 to VCC + 0.5 |
V |
VO | DC Output Voltage |
-0.5 to VCC + 0.5 |
V |
IIK | DC Input Diode Current |
± 20 |
mA |
IOK | DC Output Diode Current |
± 20 |
mA |
IO | DC Output Source Sink Current Per Output Pin |
± 35 |
mA |
ICC or IGND | DC VCC or Ground Current |
± 70 |
mA |
PD | Power Dissipation |
500 (*) |
mW |
Tstg | Storage Temperature |
-65 to +150 |
|
TL | Lead Temperature (10 sec) |
300 |
The M54/74HCT240PU, HCT241PU and HCT244PU are high speed CMOS OCTAL BUS BUFFERs fabricated in silicon gate C2MOS technology.
The M54/74HCT240PU, HCT241PU and HCT244PU have the same high speed performance of their non-PU counterpart, plus a unique input topology which incorporates a constant current source for each data input. This results is in a small IIL (-150 mA Typ.) wich can fix any data input in the HIGH Logic Level when it is left floating, thus eliminating the need of external pull-up resistor network.
Feature of the M54/74HCT240PU, HCT241PU and HCT244PU makes these devices particularly suitable in all applications where a data bus needs to beinterfaced tomanual controls like: rotary selectors,keyboards, dip-switches, etc. The inputs are compatible with TTL, NMOS and CMOS output voltage levels. They achieve the high speed operation similar to equivalent LSTTL while maintaining the CMOS low power dissipation.
All inputs are equipped with protection circuits against static discharge and transient excess voltage.