PinoutSpecifications Symbol Parameter Value Unit VCC Supply Voltage -0.5 to +7 V VI DC Input Voltage -0.5 to VCC + 0.5 V VO DC Output Voltage -0.5 to VCC + 0.5 V IIK DC Input Diode Current ± 20 mA IOK DC Output Diode C...
M74HC4094: PinoutSpecifications Symbol Parameter Value Unit VCC Supply Voltage -0.5 to +7 V VI DC Input Voltage -0.5 to VCC + 0.5 V VO DC Output Voltage -...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Symbol |
Parameter |
Value |
Unit |
VCC |
Supply Voltage |
-0.5 to +7 |
V |
VI |
DC Input Voltage |
-0.5 to VCC + 0.5 |
V |
VO |
DC Output Voltage |
-0.5 to VCC + 0.5 |
V |
IIK |
DC Input Diode Current |
± 20 |
mA |
IOK |
DC Output Diode Current |
± 20 |
mA |
IO |
DC Output Source Sink Current Per Output Pin |
± 25 |
mA |
ICC or IGND |
DC VCC or Ground Current |
± 50 |
mA |
PD |
Power Dissipation |
500 (*) |
mW |
Tstg |
Storage Temperature |
-65 to +150 |
|
TL |
Lead Temperature (10 sec) |
300 |
The M54/74HC4094 is a high speed CMOS 8 BIT SIPOSHIFT LATCH REGISTERfabricated with silicon gate C2MOS technology.
M54/74HC4094 has the same high speed performance of LSTTL combined with true CMOS low power consumption. This device consists of an 8-bit shift register and an 8-bit latch with 3-state output buffer. Data is shifted serially through the shift register on the positive going transition of the clock input signal. The output of the last stage (Qs) can be used to cascade several devices.
Data on the Qs output is transferred to a second output (Qs') on the following negative transition of the clock input signal. The data of each stage of the shift register is provided with a latch, which latches data on the negative going transition of the STROBE input signal. When the STROBE input is held high, data propagates through the latch to a3-state output buffer.
This buffer of M54/74HC4094 is enabled when OUTPUT ENABLE input is taken high. All inputs are equipped with protection circuits against static discharge and transient excess voltage.