Flash SERIAL PAGE ERASE FLASH 8 Mbit Datas
M25PE80-VMW6TG: Flash SERIAL PAGE ERASE FLASH 8 Mbit Datas
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Data Bus Width : | 8 bit | Memory Type : | NAND Flash | ||
Memory Size : | 8 Mbit | Architecture : | Sectored | ||
Interface Type : | SPI | Supply Voltage - Max : | 3.6 V | ||
Supply Voltage - Min : | 2.7 V | Maximum Operating Current : | 8 mA | ||
Operating Temperature : | + 85 C | Mounting Style : | SMD/SMT | ||
Package / Case : | SOIC-8 Wide | Packaging : | Reel |
The M25PE80-VMW6TG is designed as one kind of 8 Mbit, low voltage, page-erasable serial flash memory device that can be written or programmed 1 to 256 Bytes at a time, using the Page Write or Page Program instruction. And this device can be erased a page at a time, using the Page Erase instruction, a sector at a time, using the Sector Erase instruction, or as a whole, using the Bulk Erase instruction.
Features of the M25PE80-VMW6TG are:(1)Industrial Standard SPI Pin-out; (2)8 Mbits of Page-Erasable Flash Memory; (3)Page Write (up to 256 Bytes) in 11ms (typical); (4)Page Program (up to 256 Bytes) in 1.2ms (typical); (5)Page Erase (256 Bytes) in 10ms (typical); (6)Sector Erase (512 Kbits); (7)Bulk Erase (8 Mbits); (8)2.7 to 3.6V Single Supply Voltage; (9)SPI Bus Compatible Serial Interface; (10)50MHz Clock Rate (maximum); (11)Deep Power-down Mode 1A (typical); (12)Electronic Signature JEDEC Standard Two-Byte Signature; (13)(8014h); (14)More than 100,000 Write Cycles; (15)More than 20 Year Data Retention; (16)Hardware Write Protection of the Top Sector (64KB); (17)Software Write Protection on a 64KByte Sector Basis; (18)Software Write Protection on a 4KByte Subsector Basis for Sector 0 and Sector 15.
The absolute maximum ratings of the M25PE80-VMW6TG can be summarized as:(1)Storage Temperature: -65 to 150 °C;(2)Lead Temperature during Soldering: - °C;(3)Input and Output Voltage (with respect to Ground): -0.6 to 4.0 V;(4)Supply Voltage: -0.6 to 4.0 V;(5)Electrostatic Discharge Voltage (Human Body model): -2000 to 2000 V. If you want to know more information such as the electrical characteristics about the M25PE80-VMW6TG, please download the datasheet in www.seekic.com or www.chinaicmart.com.
Technical/Catalog Information | M25PE80-VMW6TG |
Vendor | Numonyx/ST Micro (VA) |
Category | Integrated Circuits (ICs) |
Memory Type | FLASH |
Memory Size | 8M (1M x 8) |
Speed | 75MHz |
Interface | SPI, 3-Wire Serial |
Package / Case | 8-SOIC, 8-SOP, 8-SOIJ (5.3mm Width) |
Packaging | Digi-Reel? |
Voltage - Supply | 2.7 V ~ 3.6 V |
Operating Temperature | -40°C ~ 85°C |
Format - Memory | FLASH |
Lead Free Status | Lead Free |
RoHS Status | RoHS Compliant |
Other Names | M25PE80 VMW6TG M25PE80VMW6TG M25PE80 VMW6TGDKR ND M25PE80VMW6TGDKRND M25PE80-VMW6TGDKR |