LPC2210

Features:

· 16/32-bit ARM7TDMI-S microcontroller in a LQFP144 package.
· 16 kB on-chip Static RAM.
· Serial boot-loader using UART0 provides in-system download and programming capabilities.
·EmbeddedICE-RT and Embedded Trace interfaces offer real-time debugging with the on-chip RealMonitor software as well as high speed real-time tracing of instruction execution.
· Eight channel 10-bit A/D converter with conversion time as low as 2.44 ms.
· Two 32-bit timers (with 4 capture and 4 compare channels), PWM unit (6 outputs), Real Time Clock and Watchdog.
· Multiple serial interfaces including two UARTs (16C550), Fast I2C (400 kbits/s) and two SPIs™.
· Vectored Interrupt Controller with configurable priorities and vector addresses.
· Configurable external memory interface with up to four banks, each up to 16 Mb and 8/16/32 bit data width.
· Up to 76 general purpose I/O pins (5 V tolerant). Up to 9 edge or level sensitive external interrupt pins available.


Pinout




Description

·The LPC2210 is based on a 16/32 bit ARM7TDMI-S™ CPU with real-time emulation and embedded trace support. For critical code size applications, the alternative 16-bit Thumb Mode reduces code by more than 30% with minimal performance penalty.

·With its 144 pin package, low power consumption, various 32-bit timers, 8-channel 10-bit ADC, PWM channels and up to 9 external interrupt pins this microcontroller is particularly suitable for industrial control, medical systems, access control and point-of-sale. LPC2210 provides up to 76 GPIO depending on bus configuration. With a wide range of serial communications interfaces, it is also very well suited for communication gateways, protocol converters and embedded soft modems as well as many other general-purpose applications.