LPC2106

Features:

· 16/32 bit ARM7TDMI-S processor.
· 16/32/64 kB on-chip Static RAM.
· In-System Programming (ISP) and In-Application Programming (IAP) via on-chip boot-loader software. Flash programming takes 1 ms per 512 byte line. Single sector or full chip erase takes 400 ms.
· Vectored Interrupt Controller with configurable priorities and vector addresses.
·EmbeddedICE-RT interface enables breakpoints and watchpoints. Interrupt service routines can continue to execute whilst the foreground task is debugged with the on-chip RealMonitor software.
· Embedded Trace Macrocell enables non-intrusive high speed real-time tracing of instruction execution.
· Multiple serial interfaces including two UARTs (16C550), Fast I2C (400 kbits/s) and SPI.
· Two 32-bit timers (7 capture/compare channels), PWM unit (6 outputs), Real Time Clock and Watchdog.
· Up to thirty-two 5 V tolerant general purpose I/O pins in a tiny LQFP48 (7 ´ 7 mm²) package.


Pinout




Description

·The LPC2106 are based on a 16/32 bit ARM7TDMI-S CPU with real-time emulation and embedded trace support, together with 128 kbytes (kB) of embedded high speed flash memory. A 128 bit wide memory interface and a unique accelerator architecture enable 32 bit code execution at maximum clock rate. For critical code size applications, the alternative 16-bit Thumb Mode reduces code by more than 30% with minimal performance penalty.

·Due to their tiny size and low power consumption, these microcontrollers are ideal for applications where miniaturization is a key requirement, such as access control and point-of-sale. With a wide range of serial communications interfaces and on-chip SRAM options up to 64 kilobytes, they are very well suited for communication gateways and protocol converters, soft modems, voice recognition and low end imaging, providing both large buffer size and high processing power. Various 32 bit timers, PWM channels and 32 GPIO lines make these microcontrollers particularly suitable for industrial control and medical systems.