LMV821DBVR

Number of Channels : 1
Mounting Style : SMD/SMT
Package / Case : SOT-23-5
Packaging : Reel
Input Offset Voltage : 3.5 mV
Shutdown : No
Maximum Operating Temperature : + 85 C
Output Current : 45 mA
Input Bias Current (Max) : 100 nA
Common Mode Rejection Ratio (Min) : 72 dB
Operating Supply Voltage : 5 V
Slew Rate : 1.9 V/us


Features:

• 2.5-V, 2.7-V, and 5-V Performance
• 40 °C to 125 °C Operation
• No Crossover Distortion
• Low Supply Current at V _CC+ = 5 V:
   LMV821 . 0.3 mA Typ
   LMV822 . 0.5 mA Typ
   LMV824 . 1 mA Typ
• Rail-to-Rail Output Swing
• Gain Bandwidth of 5.5 MHz Typ at 5 V
• Slew Rate of 1.9 V/ µ s Typ at 5 V


Pinout




Specifications

			MIN MAX	UNIT
VCC Supply voltage range			5.5	V
VI Input voltage range			VCC- VCC+	V
VID Differential input voltage			± VCC	V
Duration of output short circuit (one amplifier) to ground	At or below TA = 25 ° C, VCC 5.5 V		Unlimited
JA Package thermal impedance	D package	8 pin	97	° C/W
		14 pin	86
	DBV package		165
	DCK package		259
	DRL package		142
	YEA/YZA package		143
	YEP/YZP package		123
TJ Operating virtual junction temperature			150	° C
Tstg Storage temperature range			65 150	° C

Description

The LMV821DBVR, LMV822 dual, and LMV824 quad devices are low-voltage (2.5 V to 5.5 V), low-power commodity operational amplifiers. Electrical characteristics are very similar to the LMV3xx operational amplifiers (low supply current, rail-to-rail outputs, input common-mode range that includes ground). However, the LMV8xx devices offer a higher bandwidth (5.5 MHz typical) and faster slew rate (1.9 V/ µ s typical).

The LMV821DBVR devices are cost-effective solutions for applications requiring low-voltage/low-power operation and space-saving considerations. The LMV821 is available in the ultra-small DCK package, which is approximately half the size of SOT-23-5. The DCK package saves space on printed circuit boards and enables the design of small portable electronic devices (cordless and cellular phones, laptops, PDAs, PCMIA). It also allows the designer to place the device closer to the signal source to reduce noise pickup and increase signal integrity.

The LMV821DBVR devices are characterized for operation from 40 ° C to 85 ° C. The LMV8xxI devices are characterized for operation from 40 ° C to 125 ° C.

Parameters:

Technical/Catalog Information	LMV821DBVR
Vendor	Texas Instruments (VA)
Category	Integrated Circuits (ICs)
Packaging	Cut Tape (CT)
Amplifier Type	General Purpose
Number of Circuits	1 - Single
Package / Case	SOT-23-5
Slew Rate	1.9 V/s
Gain Bandwidth Product	5.5MHz
Current - Supply	300A
Current - Output / Channel	45mA
Voltage - Supply, Single/Dual (±)	2.5 V ~ 5.5 V
Output Type	Rail-to-Rail
-3db Bandwidth	-
Current - Input Bias	40nA
Operating Temperature	-40°C ~ 85°C
Voltage - Input Offset	1000V
Drawing Number	296; 4073253-4; DBV; 5
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	LMV821DBVR LMV821DBVR 296 18459 1 ND 296184591ND 296-18459-1