Features: ` -3dB bandwidth of 180MHz` 70MHz large signal bandwidth (20Vpp)` 0.1% settling in 19ns` Overdrive protected` Output may be current limited` Stable without compensation` 3M input impedance` Direct replacement for CLC206Application· Fast, precision A/D conversion· Automatic test equipment...
KH206: Features: ` -3dB bandwidth of 180MHz` 70MHz large signal bandwidth (20Vpp)` 0.1% settling in 19ns` Overdrive protected` Output may be current limited` Stable without compensation` 3M input impedance...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Vcc ..................±20V
Lout .................±150mA
common mode input voltage.....±(|Vcc|-1)V
differential input voltage.......±3V
thermal resistance:See thermal model.
junction temperature.........±175
operating etmperature........Al:-25to85
.............AK/AM/HXC/HXA:-55+125
....................-65+150
ing 10s)................+300
Vcc ..................±5V±15V
lout..................±100mA
common mode input voltage .....±(|Vcc|-5)V
gain range:..............+7to+50.-1to-50
The KH206 is a wideband, overdrive-protected operational amplifier designed for applications needing both speed and high drive capability (100mA). Utilizing a well-established current feedback architecture, the KH206 exhibits performance far beyond that of conventional voltage feedback op amps. For example, the KH206 has a bandwidth of 180MHz at a gain of +20 and settles to 0.1% in 19ns. Plus, the KH206 has a combination of important features not found in other high-speed op amps.
The 100mA output current and the large signal bandwidth of 70MHz (20Vpp) make the KH206 ideal for applications which involve both high signal amplitudes and heavy loads as in coaxial line driving applications.
Complete overdrive protection has been designed into the KH206. This is critical for applications, such as ATE and instrumentation, which require protection from signal levels high enough to cause saturation of the amplifier. This feature allows the output of the op amp to be protected against short circuits using techniques developed for low-speed op amps. With this capability, even the fastest signal sources can feature effective short circuit protection.
The KH206 is constructed using thin film resistor/bipolar transistor technology, and is available in the following ver sions:
KH206AI ...-25 to +85....12-pin TO-8 can
KH206AK ...-55 to +125...12-pin TO-8 can, features burn-in & hermetic testing
KH206AM...-55 to +125... 12-pin TO-8 can, environmentally screened and electrically tested to MIL-STD-883
KH206HXC ..-55 to +125... SMD#: 5962-8985801HXC
KH206HXA ..-55 to +125 ...SMD#: 5962-8985801HXA