Features: `-3dB bandwidth of 170MHz`0.1% settling in 22ns`Complete overdrive protection`Low power: 570mW (190mW at ±5V)`3M input resistance`Output may be current limited`Direct replacement for CLC205Application·Fast, precision A/D conversion·Automatic test equipment·Input/output amplifiers·Photodi...
KH205: Features: `-3dB bandwidth of 170MHz`0.1% settling in 22ns`Complete overdrive protection`Low power: 570mW (190mW at ±5V)`3M input resistance`Output may be current limited`Direct replacement for CLC20...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
VCC.......................±20V
Io........................±75mA
common mode input voltage ..........±(|VCC| -1)V
differential input voltage ............±3V
thermal resistance ...............(see thermal model)
operating temperature .............AI: -25°C to +85°C
.........................AK/AM/HXC/HXA: -55°C to +125°C
sample tested storage temperature ......-65°C to +150°C
lead temperature (soldering 10s) ........+300°C
VCC .......................±5V to ±15V
Io........................±50mA
common mode input voltage ..........±(|VCC| -5)V
gain range ...................+7 to +50, -1 to -50
The KH205 is a wideband overdrive-protected operational amplifier designed for applications needing both speed and low power operation. Utilizing a well-established current feedback architecture, the KH205 exhibits performance far beyond that of conventional voltage feedback op amps. For example, the KH205 has a bandwidth of 170MHz at a gain of +20 and settles to 0.1% in 22ns. Plus, the KH205 has a combination of important features not found in other high-speed op amps.
For example, the KH205 has been designed to consume little power 570mW at ±15V supplies. The result is lower power supply requirements and less systemlevel heat dissipation. In addition, the device can be operated on supply voltages as low as ±5V for even lower power dissipation.
Complete overdrive protection has been designed into the part. This is critical for applications, such as ATE and instrumentation, which require protection from signal levels high enough to cause saturation of the amplifier. This feature allows the output of the op amp to be protected against short circuits using techniques developed for low-speed op amps. With this capability, even the fastest signal sources can feature effective short circuit protection.
The KH205 is constructed using thin film resistor/bipolar transistor technology, and is available in the following versions:
KH205AI ...-25to +85 ...12-pin TO-8 can
KH205AK ...55 to +125 ..12-pin TO-8 can, features burn-in & hermetic testing
KH205AM...-55 to +125 ..12-pin TO-8 can, environmentally screened and electrically tested to MIL-STD-883
KH205HXC ..-55to +125...SMD#: 5962-9083501HXC
KH205HXA ..-55 to +125 ..SMD#: 5962-9083501HXA