KH200

 `-3dB bandwidth of 95MHz
 `0.1% settling in 18ns
 `4000V/s slew rate
 `Low distortion, linear phase
 `3.6ns rise and fall times
 `Direct replacement for CLC200

supply voltage(v_cc)............±20v
output current..............±100mA
thermel resistance(_ca) .........see thermal model
junction temperature...........±175
operating temperature..........AL:-25+85
...............AK,AM,HXC,HXA:-55+125
storage temperature ..........-65to+150
lead temperature(soldering 10s)....+300

The KH200 operational amplifier achieves performance far superior to that of other high performance op amps. A current feedback design provides a bandwidth of DC-95MHz and an unprecedented settling time of 18nsec to 0.1%. And since thermal tail has been eliminated, the KH200 can be depended upon to settle fast and solidly maintain its level. Drive capability is also impressive at 24Vpp and 100mA.

Using the KH200 is as easy as adding power supplies and a gain-setting resistor. The result is reliable, consistent performance because such characteristics as bandwidth and settling time are virtually independent of gain setting. Unlike conventional op amp designs where the optimum gain bandwidth product occurs at a high gain, minimum settling time at a gain of -1, maximum slew rate at a gain of +1, et cetera, the KH200 offers predictable response at gain settings from ±1 to ±50. This, coupled with consistent performance from unit to unit with no external compensation, makes the KH200 a real time and costsaver in design and production situations alike.

Minimizing settling time was a design goal of the KH200. Settling time is one of the most demanding of all op amp requirements since it is affected by the op amp's bandwidth, gain flatness, and harmonic distortion. The result of this effort is an amplifier fast enough for the most demanding high speed D to A converters and "flash" A to D converters.

The superior slew rate and rise and fall times of the KH200 make it an ideal amplifier for a broad range of pulse, analog, and digital applications. Flat gain and phase response from DC to beyond 50MHz ensure distortion levels well below those of other op amps. A full power bandwidth of 20MHz eliminates the need for power buffers in many applications.

The KH200 is constructed using thin film resistor/bipolar transistor technology, and is available in the following versions:
KH200AI ..-25 to +85 ...12-pin TO-8 can
KH200AK.. -55 to +125 ..12-pin TO-8 can, features burn-in and hermetic testing
KH200AM..-55 to +125 ..12-pin TO-8 can, environmentally screened and electronically tested to MIL-STD-883
KH200HXC..-55 to +125..SMD#: 5962-8991001XC
KH200HXA..-55 to +125 ..SMD#: 5962-8991001XA