Features: • Built using the advantages and compatibility of CMOS and IXYS HDMOSTM processes• Latch-Up Protected up to 0.5A• High Peak Output Current: 4A Peak• Wide Operating Range: 4.5V to 35V• Ability to Disable Output under Faults• High Capacitive Load Drive C...
IXDD404: Features: • Built using the advantages and compatibility of CMOS and IXYS HDMOSTM processes• Latch-Up Protected up to 0.5A• High Peak Output Current: 4A Peak• Wide Operating ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Parameter | Value |
Supply Voltage | 40 V |
All Other Pins | -0.3 V to VCC + 0.3 V |
Junction Temperature | 150 |
Storage Temperature | -65 to 150 |
Lead Temperature (10 sec) | 300 |
The IXDD404 is comprised of two 4 Amp CMOS high speed MOSFET drivers. Each output can source and sink 4 A of peak current while producing voltage rise and fall times of less than 15ns to drive the latest IXYS MOSFETS & IGBT's. The input of the driver is compatible with TTL or CMOS and is fully immune to latch up over the entire operating range. Designed with small internal delays, cross conduction/current shootthrough is virtually eliminated in the IXDD404. Improved speed and drive capabilities are further enhanced by very low, matched rise and fall times.
Additionally, each driver in the IXDD404 incorporates a unique ability to disable the output under fault conditions. When a logical low is forced into the Enable input of a driver, both of it's final output stage MOSFETs (NMOS and PMOS) are turned off. As a result, the respective output of the IXDD404 enters a tristate mode and achieves a Soft Turn-Off of the MOSFET/ IGBT when a short circuit is detected. This helps prevent damage that could occur to the MOSFET/IGBT if it were to be switched off abruptly due to a dv/dt over-voltage transient.
The IXDD404 is available in the standard 8 pin P-DIP (PI), SOIC-8 (SIA) and SOIC-16 (SIA-16) packages. For enhanced thermal performance, the SOIC-8 and SOIC-16 are also available with an exposed grounded metal back package as the SI and SI-16 respectively.