Features: ` 1-Mbps Signaling Rate Low Channel-to-Channel Output Skew;1 ns max Low Pulse-Width Distortion (PWD);2 ns max Low Jitter Content; 1 ns Typ at 150 Mbps` Typical 25-Year Life at Rated Working Voltage(see application note SLLA197 and Figure 10)` 4000-V peak Isolation, 560-Vpeak VIORM UL 157...
ISO7231A: Features: ` 1-Mbps Signaling Rate Low Channel-to-Channel Output Skew;1 ns max Low Pulse-Width Distortion (PWD);2 ns max Low Jitter Content; 1 ns Typ at 150 Mbps` Typical 25-Year Life at Rated Workin...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
VALUE | UNIT | ||||
VCC Supply voltage(2), VCC1, VCC2 | 0.5 to 6 | V | |||
VI Voltage at IN, OUT | 0.5 to 6 | V | |||
IO Output current | ±15 | mA | |||
ESD Electrostatic discharge |
Human Body Model | JEDEC Standard 22, Test Method A114-C.01 | All pins | ±4 | kV |
Field-Induced-Charged Device Model |
JEDEC Standard 22, Test Method C101 | ±1 | |||
Machine Model | ANSI/ESDS5.2-1996 | ±200 | V | ||
TJ Maximum junction temperature | 170 |
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values are with respect to network ground terminal and are peak voltage values.
The ISO7230A and ISO7231A are triple-channel digital isolators each with multiple channel configurations and output enable functions. These devices have logic input and output buffers separated by TI's silicon dioxide (SiO2) isolation barrier. Used in conjunction with isolated power supplies, these devices block high voltage, isolate grounds, and prevent noise currents on a data bus or other circuits from entering the local ground and interfering with or damaging sensitive circuitry.
The ISO7230 triple-channel device has all three channels in the same direction while the ISO7231 has two channels in one direction and one channel in opposition. These devices have an active-high output enable that when driven to a low level, places the output in a high-impedance state and turns off internal bias circuitry to conserve power.
The ISO7230A and ISO7231A have TTL input thresholds and a noise-filter at the input that prevents transient pulses of up to 2 ns in duration from being passed to the output of the device.
In each device a periodic update pulse is sent across the isolation barrier to ensure the proper dc level of the output. If this dc-refresh pulse is not received, the input is assumed to be unpowered or not being actively driven, and the failsafe circuit drives the output to a logic high state. (Contact TI for a logic low failsafe option).
These devices require two supply voltages of 3.3-V, 5-V, or any combination. All inputs are 5-V tolerant when supplied from a 3.3-V supply and all outputs are 4-mA CMOS. These devices are characterized for operation over the ambient temperature range of 40 to 125.