IRLL2705PBF

Transistor Polarity : N-Channel
Mounting Style : SMD/SMT
Maximum Operating Temperature : + 150 C
Packaging : Tube
Gate-Source Breakdown Voltage : 16 V
Drain-Source Breakdown Voltage : 55 V
Continuous Drain Current : 3.8 A
Package / Case : SOT-223
Configuration : Single Dual Drain
Resistance Drain-Source RDS (on) : 65 mOhms


Features:






Specifications






Description

      The IRLL2705PbF has the following features including surface mount;dynamic dv/dt rating;login-level gate drive;fast switching;ease of paralleling;lead-free.
      The horizontal final stage transfer clock input pin LH1 is connected to the horizontal transfer clock input pin H1.The reset gate clock voltage need not be adjusted when reset gate clock is driven when the specifications are as given below. In this case, the reset gate clock voltage setting indicated on the back of the image sensor has not significance. The Micron® Imaging MT9T001 is a QXGA-format 1/2- inch CMOS active-pixel digital image sensor with an active imaging pixel array of 2,048H x 1,536V. It incor- porates sophisticated camera functions on-chip such as windowing, column and row skip mode, and snap- shot mode. It is programmable through a simple two- wire serial interface.
      Programming the Demodulator Section Short-Programming and General Programming of the Demodulator Part Demodulator Write Registers: Table and Addresses Demodulator Read Registers: Table and Addresses Demodulator Write Registers for Short-Programming: Functions and Values Demodulator Short-Programming AUTO_FM/AM: Automatic Switching between NICAM and FM/AM-Mono (MSP 3415D only) .The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
      At present there is not too much information about IRLL2705PbF.If you are willing to find more  about IRLL2705PbF, please pay attention to our web! We will promptly update the relevant information.

Parameters:

Technical/Catalog Information	IRLL2705PBF
Vendor	International Rectifier
Category	Discrete Semiconductor Products
Mounting Type	Surface Mount
FET Polarity	N-Channel
Drain to Source Voltage (Vdss)	55V
Current - Continuous Drain (Id) @ 25° C	3.8A
Rds On (Max) @ Id, Vgs	40 mOhm @ 3.8A, 10V
Input Capacitance (Ciss) @ Vds	870pF @ 25V
Power - Max	2.1W
Packaging	Tube
Gate Charge (Qg) @ Vgs	48nC @ 10V
Package / Case	SOT-223, SC-73, TO-261 (3 Leads + Tab)
FET Feature	Logic Level Gate
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	IRLL2705PBF IRLL2705PBF