IRG4BC30FPBF

Gate-Emitter Leakage Current :
Maximum Operating Temperature :
Collector- Emitter Voltage VCEO Max : 600 V
Packaging : Tube
Configuration : Single
Maximum Gate Emitter Voltage : +/- 20 V
Collector-Emitter Saturation Voltage : 1.8 V
Package / Case : TO-220AB
Power Dissipation : 100 W
Continuous Collector Current at 25 C : 31 A


Features:






Specifications






Description

      The IRG4BC30FPbF has the following features including fast optimiazed for medium operating frequencies;generation 4 IGBT design provides tighter parameter distribution and higher efficiency than generation 3;lead-free etc.
      Electrostatic charges of IRG4BC30FPbF as high as 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Although the IRG4BC30FPBF/IRG4BC30FPBF features proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality.  When only the S0 pin is at a logic one the pressure measuring circuit in the device is powered up and the pressure output signal is connected to the sample capacitor through a multiplexer. When the S0 pin returns to the low state the multiplexer will first turn off to store the signal on the sample capacitor before powering down the measuring circuitry. Atmels AT77C105A fingerprint sensor is dedicated to PDA, cellular and smartphone applications. Based on FingerChip thermal technology, the AT77C105A is a linear sensor that captures fingerprint images by sweeping the finger over the sensing area. This product embeds true hardware-based 8-way navigation and click functions as well, as enabling elimination of mechanical joystick devices.
      the latches store information that was present on the D inputs a setup time preceding the HIGH-to-LOW transition of LEn. The 3-STATE standard outputs are controlled by the Output Enable (OEn) input. When OEn is LOW, the standard outputs are in the 2-state mode. When OEn is HIGH, the standard outputs are in the high impedance mode but this does not interfere with entering new data into the latches.Timer counter 3 : 8-bit 1 (square-wave output, event count, generation of remote control carrier, serial baud rate timer)   Clock source 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external   clock input Interrupt source coincidence with compare register 3 .

Parameters:

Technical/Catalog Information	IRG4BC30FPBF
Vendor	International Rectifier
Category	Discrete Semiconductor Products
Input Type	Standard
Voltage - Collector Emitter Breakdown (Max)	600V
Current - Collector (Ic) (Max)	31A
Vce(on) (Max) @ Vge, Ic	1.8V @ 15V, 17A
Power - Max	100W
Mounting Type	Through Hole
Package / Case	TO-220-3 (Straight Leads)
Packaging	Tube
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	IRG4BC30FPBF IRG4BC30FPBF