IRFP264NPBF

Transistor Polarity : N-Channel
Gate-Source Breakdown Voltage : +/- 20 V
Configuration : Single
Maximum Operating Temperature : + 175 C
Mounting Style : Through Hole
Packaging : Tube
Drain-Source Breakdown Voltage : 250 V
Continuous Drain Current : 44 A
Package / Case : TO-247AC
Resistance Drain-Source RDS (on) : 0.06 Ohms


Features:






Specifications






Description

      The IRFP264NPbF has the following features including Advanced Process Technology;Dynamic dv/dt Rating;175°C Operating Temperature;Fast Switching;Fully Avalanche Rated;Ease of Paralleling;Simple Drive Requirements;Lead-Free.
      The IRFP264NPBF employs a bi-directional two-wire bus protocol using few pins or board space. Figure 2 illustrates a typical system configuration using the IRFP264NPBF in a microcontroller-based system. The industry standard two-wire bus is familiar to many users but is described in this section. Fifth Generation HEXFETs from International Rectifier utilize advanced processing techniques to achieve extremely low on-resistance per silicon area. This benefit, combined with the fast switching speed and ruggedized device design that HEXFET Power MOSFETs are well known for, provides the designer with an extremely efficient and reliable device for use in a wide variety of applications. The TO-247 package is preferred for commercial-industrial applications where higher power levels preclude the use of TO-220 devices. The TO-247 is similar but superior to the earlier TO-218 package because of its isolated mounting hole.Data and specifications subject to change without notice. This product has been designed and qualified for the Industrial market. Qualification Standards can be found on IR's Web site.
       The IDT octal buffer/line driver of IRFP264NPbF is built using an advanced dual metal CMOS technology. The FCT540T is similar in function to the FCT240T, except that the inputs and outputs are on opposite sides of the package. This pinout arrangement makes these devices especially useful as output ports for microprocessors and as backplane drivers, allowing ease of layout and greater board density.The CY7C964 Bus Interface Logic Circuit is a seamless inter- face between the VIC068A/VIC64 and the VMEbus signals. The device functions equally well in the established 32-bit VMEbus arena and the new 64-bit VMEbus standard. The de- vice contains three 8-bit counters to fulfill the functions of Block counters, and DMA counters as implied by the D64 portion of the VMEbus specification. It also contains the necessary mul- tiplexing logic to allow the 64-bit-wide VMEbus path to be fun- nelled to and from the 32-bit local bus. Control circuitry is in- cluded to manage the switching of the 32-bit address bus during normal (32-bit) operations, and during MBLT (64-bit) operations. The on-chip drivers are capable of driving the VMEbus directly (48 mA).