Features: • Non-parity 200-Pin Small Outline Dual-In-Line Memory Modules• Two ranks 64M* 64 organization• JEDEC standard Double Data Rate Synchronous DRAMs (DDR SDRAM)• Single +2.5V (± 0.2 V) power supply and +2.6 V (± 0.1 V) for DDR400• Built with 512 Mbit DDR SDRAMs...
HYS64D64020HDL-6-B: Features: • Non-parity 200-Pin Small Outline Dual-In-Line Memory Modules• Two ranks 64M* 64 organization• JEDEC standard Double Data Rate Synchronous DRAMs (DDR SDRAM)• Singl...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Features: • 184-pin Unbuffered 8-Byte Dual-In-Line DDR-I SDRAM non-parity and ECC-Modules fo...
Parameter |
Symbol |
Values |
Unit |
Note/Test Condition | ||
Min. |
typ. |
Max. | ||||
Voltage on I/O pins relative to VSS |
VIN, VOUT |
0.5 |
- |
VDDQ+0.5 |
V |
- |
Voltage on inputs relative to VSS |
VIN |
-1 |
- |
+3.6 |
V |
- |
Voltage on VDD supply relative to VSS |
VDD |
-1 |
- |
+3.6 |
V |
- |
Voltage on VDDQ supply relative to VSS |
VDDQ |
-1 |
- |
+3.6 |
V |
- |
Operating temperature (ambient) |
TA |
0 |
- |
+70 |
°C |
- |
Storage temperature (plastic) |
TSTG |
-55 |
- |
+150 |
°C |
- |
Power dissipation (per SDRAM component) |
PD |
- |
1 |
- |
W |
- |
Short circuit output current |
IOUT |
- |
50 |
- |
mA |
- |
Attention: Permanent damage to the device may occur if "Absolute Maximum Ratings" are exceeded. This is a stress rating only, and functional operation should be restricted to recommended operation conditions. Exposure to absolute maximum rating conditions for extended periods of time may affect device reliability and exceeding only one of the values may cause irreversible damage to the integrated circuit.
The HYS64D64020HDL-6-B are industry standard 200-Pin Small Outline Dual-In-Line Memory Modules (SO-DIMMs) organized as 64M ×64. The memory array is designed with Double Data Rate Synchronous DRAMs (DDR SDRAM). A variety of decoupling capacitors of the HYS64D64020HDL-6-B are mounted on the PC board. The DIMMs feature serial presence detect based on a serial E2PROM device using the 2-pin I2C protocol. The first 128 bytes are programmed with configuration data and the second 128 bytes are available to the customer.