Features: ` High speed Access time: 100/120/150 ns (max)` Low power dissipation Active mode: 25 mW (typ) (f = 1 MHz) Standby mode: 5 W (typ)` High reliability and fast programming Programming voltage: +12.5 V DC Fast High-Reliability Programming Algorithm available` Device identifier mode Manufact...
HN27C256AG: Features: ` High speed Access time: 100/120/150 ns (max)` Low power dissipation Active mode: 25 mW (typ) (f = 1 MHz) Standby mode: 5 W (typ)` High reliability and fast programming Programming voltag...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Features: SpecificationsDescription The Hitachi HN27C101A series is a 1-megabt ultrviolet erasable...
Features: ` Single power supply: +5 V ± 10%` Fast high-reliability programming mode and fast high-...
Features: ` Single power supply: +5 V ± 5% (HN27C101AG-10/HN27C301AG-10) +5 V ± 10% (HN27C101AG/HN...
Parameter |
Symbol |
Value |
Unit |
All input and output voltages*1 |
Vin, Vout |
0.6*2 to +7.0 |
V |
A9 input voltage*1 |
VID |
0.6*2 to + 13.5 |
V |
VPP voltage*1 |
VPP |
0.6 to +13.5 |
V |
VCC voltage*1 |
VCC |
0.6 to + 7.0 |
V |
Operating temperature range |
Topr |
0 to +70 |
°C |
Storage temperature range |
Tstg |
55 to +125 |
°C |
Storage temperature range under bias |
Tbias |
10 to +80 |
°C |
This Hitachi HN27C256AG is a 256-kbit ultraviolet erasable and electrically programmable ROM, featuring high speed and low power dissipation. Fabricated on advanced fine process and high speed circuitry technique, it makes high speed access time possible for 16 bit microprocessors such as the 8086 and 68000. And low power dissipation in active and standby modes matches our CMOS 256-kbit EPROM. In programming operation, the HN27C256AG realizes faster programming times than our conventional 256-kbit EPROM by Hitachi's Fast High-Reliability Programming Algorithm. Pin arrangement, pin configuration and programming voltage are compatible with our 256-kbit EPROM series, therefore existing programmers can be used with the N27C256AG.