Features: • Both up and downconverting functions• Harmonic LO mixing capability• Large bandwidth: RF port: 2043 GHz LO port match: DC43 GHz LO amplifier: 2043 GHz IF port: DC5 GHz• Repeatable conversion loss: 9.5 dB typical at 30 GHz• Low LO drive required• 50 p...
HMMC-3040: Features: • Both up and downconverting functions• Harmonic LO mixing capability• Large bandwidth: RF port: 2043 GHz LO port match: DC43 GHz LO amplifier: 2043 GHz IF port: DC5 GHz&...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
• Both up and downconverting functions
• Harmonic LO mixing capability
• Large bandwidth:
RF port: 2043 GHz
LO port match: DC43 GHz
LO amplifier: 2043 GHz
IF port: DC5 GHz
• Repeatable conversion loss:
9.5 dB typical at 30 GHz
• Low LO drive required
• 50 port matching networks
Symbol | Parameters and Test Conditions | Units | Min. | Typ. | Max. |
VD1,2 | Drain Supply Operating Voltages | V | 2 | 4.5 | 5 |
ID1 ID2 VG1,2 |
First Stage Drain Supply Current (VDD = 4.5 V, VG1 -0.8 V) Total Drain Supply Current for Stage 2 (VDD = 4.5 V, VGG -0.8 V) Gate Supply Operating Voltages (IDD 150mA) |
mA mA V |
27 123 -0.8 |
||
VP | Pinch-off Voltage (VDD = 4.5 V, VDD 10 mA) | V | -2 | -1.2 | -0.8 |
ch-bs Tch |
Thermal Resistance (Channel-to-Backside at Tch = 160°C)[2] Channel Temperature (TA = 75°C, MTTF > 106 hrs VDD = 4.5V, IDD = 300 mA)[3] |
/Watt |
62 160 |
Notes:
1. Backside ambient operating temperature TA = 25, unless otherwise noted.
2. Thermal resistance /Watt) at a channel temperature T() can be estimated using the equation: (T) 62x [T()+273]/[160+273].
3. Derate MTTF by a factor of two for every 8 above Tch.
The HMMC-3040 is a broadband MMIC Double-Balanced Mixer (DBM) with an integrated highgain LO amplifier. It can be used as either an up-converter or as a down-converter in microwave/ millimeter-wave transceivers. If desired, the LO amplifier can be biased to function as a frequency multiplier to enable harmonic mixing of a LO source.
This three-port device HMMC-3040 has input and output matching circuitry for use in 50 ohm environments. The MMIC provides repeatable conversion loss (requiring no tuning), thereby making it suitable for automated assembly processes.