HLMP-Q106

Illumination Color : Red
Forward Current : 20 mA
Packaging : Bulk
Luminous Intensity : 400 mcd
Forward Voltage : 1.9 V
Lens Color/Style : Untinted Non-Diffused
Viewing Angle : 15 deg
LED Size : 2.34 mm x 2.21 mm x 2.92 mm
Wavelength/Color Temperature : 644 nm


Description

Dome Packages
The HLMP-Q106 Series dome lamps, for use as indicators, use an untinted, nondiffused lens to provide a high luminous intensity within a narrow radiation pattern.

Lead Configurations
All of these HLMP-Q106  devices are made by encapsulating LED chips on axial lead frames to form molded epoxy subminiature lamp packages. A variety of package configuration options is available. These include special surface mount lead configurations, gull wing, yoke lead, or Z-bend. Right angle lead bends at 2.54 mm (0.100 inch) and 5.08 mm (0.200 inch) center spacing are available for through hole mounting. For more information refer to Standard SMT and Through Hole Lead Bend Options for Subminiature LED Lamps data sheet.

Technology
These HLMP-Q106 subminiature solid state lamps utilize a highly optimized LED material technology, transparent substrate aluminum gallium arsenide (TS AlGaAs). This LED technology has a very high luminous efficiency, capable of producing high light output over a wide range of drive currents (500 mA to 50 mA). The color is deep red at a dominant wavelength of 644 nm deep red. TS AlGaAs is a flip-chip LED technology, die attached to the anode lead and wire bonded to the cathode lead.

Parameters:

Technical/Catalog Information	HLMP-Q106
Vendor	Avago Technologies US Inc.
Category	Optoelectronics
Color	Red
Lens Style/Size	Round, 1.8mm
Millicandela Rating	400mcd
Voltage - Forward (Vf) Typ	1.9V
Wavelength - Dominant	644nm
Wavelength - Peak	654nm
Current - Test	20mA
Viewing Angle	15°
Lens Type	Clear
Luminous Flux	280 mlm
Package / Case	Axial
Mounting Type	Through Hole
Packaging	Bulk
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	HLMP Q106 HLMPQ106