Features: SpecificationsDescriptionThe HF116F-3 has the following features including 30 A switching capability;4kV dielectric strength(between coil and contacts);Heavy load up to 7500VA;Class F insulation available;3mm contact gap available;Environmental friendly product (RoHS compliant);Outline D...
HF116F-3: Features: SpecificationsDescriptionThe HF116F-3 has the following features including 30 A switching capability;4kV dielectric strength(between coil and contacts);Heavy load up to 7500VA;Class F insu...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The HF116F-3 has the following features including 30 A switching capability;4kV dielectric strength(between coil and contacts);Heavy load up to 7500VA;Class F insulation available;3mm contact gap available;Environmental friendly product (RoHS compliant);Outline Dimensions: (50.5 x 33.5 x 51.0) mm.
The data of HF116F-3 shown above are initial values,Please fnd coil temperature curve in the characteristic curves below,For the wash tight type, please open two vent holes after installing relay (or cleansing PCB board) in order to increase the relay reliability.We have now gradually updated our ordering information. We suggest new type should be selected. If necessary, old type can be kept for some period for the old customers ,For the application of motor load, capacitive load and the like high inrush current, AgSnOz contact material is recommended. For the application of resistive load, inductive load, AgCdO contact material is recommened on the priority,HF116F-2 is an environmental friendly product. Please mark a special code (555) or (551) when ordering. (551) stands RoHS compliant with Cadmium contact; (555) stands for RoHS compliant with Cadmium-free contact.This datasheet is for the customers' reference. All the specifications of HF116F-3 are subject to change without notice.We could not evaluate all the performance and all the parameters for every possible application. Thus the user should be in a right position to choose the suitable product for their own application. If there is any query, please contact Hongfa for the technical service. However, it is the user s responsibility to determine which product should be used only.
Information contained HF116F-3 herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.