HDMP-1000

The HDMP-1000,HDMP-1002 and HDMP-1004 are used to build a high speed data link for point to point communication.The HDMP-1000 of one HDMP-1002 and one HDMP-1004.The monolithic silicon bipolar transmitter chip and receiver chip are each provided in a standard,68 pin,ceramic quad flat pack (CQFP).

From the user's viewpoint,these products can be thought of as providing a "virtual ribbon cable"interface for the transmission of data.Parallel data loaded into the Tx(transmitter) HDMP-1000 chip is delivered to the Rx(receiver) chip over a serial channel,which can be eigher a coaxial copper cable or optical link.

The HDMP-1000,HDMP-1002 and HDMP-1004 has some absolute maximum ratings,Tc = 25,except as specified.Operation in excess of any one of these conditions may result in permanent damage to this device.When symbol is VEE,the parameter is supply voltage,the units is V,the minimum is -7,the maximum is +0.5.When symbol is VIN,ECL,the parameter is ECL input voltage,the units is V,the minimum is -3,the maximum is +0.5.When symbol is VIN,BBL,the parameter is H50 input voltage,the units is V,the minimum is -2,the maximum is +1.When symbol is IO,ECL,the parameter is ECL output source current,the units is mA,the maximum is +50.When symbol is Tstg,the parameter is storage temperature,the units is ,the minimum is -40,the maximum is +130.When symbol is Tj,the parameter is junction temperature,the units is ,the minimum is -40,the maximum is +130.When symbol is Tmax,the parameter is maximum assembly temperature (for 10 seconds maximum),the units is ,the maximum is +260.