Features: · Two proximity switch channels· The input and output pins are arranged in pairs for convenient printed circuit board mounting.· Wide operating power-supply voltage range: 4.75 to 30 V· Low power with a dissipation current of only 2.5 mA· Normal and inverted outputs can be acquired at th...
HA16603PF: Features: · Two proximity switch channels· The input and output pins are arranged in pairs for convenient printed circuit board mounting.· Wide operating power-supply voltage range: 4.75 to 30 V· Lo...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Features: ·Wide operational supply voltage range (VCC = 6 to 40 V)·Various control signals are gen...
Features: ·Wide operational supply voltage range (VCC = 6 to 40 V)·Various control signals are gen...
· Two proximity switch channels
· The input and output pins are arranged in pairs for convenient printed circuit board mounting.
· Wide operating power-supply voltage range: 4.75 to 30 V
· Low power with a dissipation current of only 2.5 mA
· Normal and inverted outputs can be acquired at the same time.
· The outputs is available for current-source drive only since the internal circuits are NPN transistors with open emitter outputs.
Item |
Symbol |
Rated Value |
Unit |
Operating power-supply voltage range |
VCC |
4.75 to 30 |
V |
Output voltage |
Vout |
0 to VCC |
V |
Hysteresis pin voltage |
V11, V14 |
0 to VCC |
V |
Sensor pin voltage |
V9, V16 |
1.3 to +2.0 |
V |
Sensitivity pin voltage |
V12, V13 |
0.65 to +2.0 |
V |
Capacitor pin voltage |
V4, V6 |
0 to +2.0 |
V |
Output source current |
Io(source) |
7 to 0 |
mA |
Hysteresis pin sink current |
I11, I14 (sink) |
0 to +1.0 |
mA |
Sensitivity pin source current |
I12, I13 (source) |
5 to +0.1 |
mA |
Sensor pin source current |
I9, I16 (source) |
1.0 to 0 |
mA |
Capacitor pin sink current |
I4, I6 (sink) |
0 to +5.0 |
mA |
Allowable power dissipation* |
PT |
625 |
mW |
Capacitor pin source current |
I4, I6 (source) |
320 to 0 |
A |
Operating temperature |
Topr |
25 to +85 |
°C |
Storage temperature |
Tstg |
40 to +125 |
°C |
Note: When multiple maximum ratings apply to the same pin, the rating that corresponds to the smallest stress is the valid rating. * See page 51.
The HA16603P is an IC for use with metal proximity switches. It can be used for the coin sensor circuit in vending machines and similar microprocessor sensors.